Documentation, Support, and Training
Understanding ILOM on the Switch
Administering ILOM (Web Interface)
Understanding Switch-Specific Commands
activate Command (switch-specific)
deactivate Command (switch-specific)
Traces the InfiniBand path. Issued on the Linux InfiniBand host.
ibtracert [-d][-D][-G][-h][-m mlid][-s smlid][-v][-V][-C ca_name][-P ca_port][-t timeout][lid|dr_path|guid [startlid [endlid]]]
where:
mlid is the multicast LID.
smlid is the Subnet Manager LID.
ca_name is the channel adapter name.
ca_port is the channel adapter port.
timeout is the timeout in milliseconds.
lid is the local identifier.
dr_path is the directed path.
guid is the global unit identifier.
startlid is the starting LID for a range.
endlid is the ending LID for a range.
This InfiniBand software command uses SMPs to trace the path from a source GID or LID to a destination GID or LID. Each responding hop in the path is displayed. The -m option enables multicast path tracing between source and destination nodes.
The following table describes the options to the ibtracert command and their purposes:
|
The following example shows how to display the path from LID 58 to LID 57 with the ibtracert command.
# ibtracert 58 57 From ca {0x0003ba000100c708} portnum 2 lid 58-58 "nsn34-39 HCA-1" [2] -> switch port {0x00bad0cc010016a2}[22] lid 1-1 "Sun DCS 648 shmm1500 LC slot 6 switch 0" [1] -> switch port {0x00bad0fc0100f8b2}[7] lid 57-57 "Sun DCS 648 shmm1500 FC slot 8 switch 1" To switch {0x00bad0fc0100f8b2} portnum 0 lid 57-57 "Sun DCS 648 shmm1500 FC slot 8 switch 1" #
ibtracert man page