Documentation, Support, and Training
Understanding ILOM on the Switch
Administering ILOM (Web Interface)
Understanding Switch-Specific Commands
activate Command (switch-specific)
deactivate Command (switch-specific)
Adds a user. Issued on the CMC.
user add userid user_name channel_access_flags privilege_level password
where:
userid is a valid user identifying number.
user_name is the username (truncated to 16 characters).
channel_access_flags is described in the following topic.
privilege_level is the user privilege level.
password is the user’s password (truncated to 16 characters).
This CLIA command adds a new user to the system. The channel access flag is the first byte of the SetUserInfo command, of which only bits 4, 5, and 6 are meaningful. Their use is as follows:
Bit 6 – IPMI messaging enabled.
Bit 5 – Link authentication enabled.
Bit 4 – Restricted to callback.
Note - The user password is enclosed in quotes (““).
The following example shows how to add user 3 with the name test_user, administrator privilege level, and password passwurd with the user add command.
# clia user add 3 "test_user" 0x40 4 "passwurd" Pigeon Point Shelf Manager Command Line Interpreter User 3 added successfuly # clia user Pigeon Point Shelf Manager Command Line Interpreter 1: "" Channels 0-15 Privilege level: "Administrator" Flags: "IPMI Messaging" 2: "openhpi" Channels 0-15 Privilege level: "OEM Proprietary" Flags: "IPMI Messaging" 3: "test_user" Channels 0-15 Privilege level: "Administrator" Flags: "IPMI Messaging" #