Documentation, Support, and Training
Understanding ILOM on the Switch
Administering ILOM (Web Interface)
Understanding Switch-Specific Commands
activate Command (switch-specific)
deactivate Command (switch-specific)
Controls a FRU. Issued on the CMC.
frucontrol IPMB_address FRU_ID option
where:
IPMB_address is the IPMB bus address of the component.
FRU_ID is the FRU identifier of the component or portion of the component.
option is described in the following topic.
This CLIA command sends a request to the specified FRU to perform the specified operation on the FRU payload.
The parameter option specifies the option of the frucontrol command to be used:
cold_reset (abbreviated as cr) – Performs a cold reset of the FRU payload.
warm_reset (abbreviated as wr) – Performs a warm reset of the FRU payload.
graceful_reboot (abbreviated as gr) – Performs a graceful reboot of the FRU payload.
diagnostic_interrupt (abbreviated as di) – Issues the diagnostic interrupt.
The following example shows how to issue a cold reset command to FRU 0 at IPMB address 94 (fabric card 0) with the frucontrol command.
# clia frucontrol 94 0 cr Pigeon Point Shelf Manager Command Line Interpreter FRU Control: Controller 0x94, FRU ID # 0, command 0x00, status 0(0x0) Command executed successfully #