Documentation, Support, and Training
Understanding ILOM on the Switch
Administering ILOM (Web Interface)
Understanding Switch-Specific Commands
activate Command (switch-specific)
deactivate Command (switch-specific)
Displays switch log. Issued on the CMC.
showlogs
This switch-specific command displays a more user-friendly log of switch events, including timestamp, location, sensor, and type of event.
The following example shows how to display the switch log with the showlogs command.
# showlogs Oct 26 11:55:34 2009; from:(LC 2); sensor:(I4_BOOTED_STATUS); event:asserted: 0x03 Oct 26 11:55:52 2009; from:(FC 0); sensor:(0); event:asserted: HotSwap: FRU 0 M4->M7, Cause=0x4 Oct 26 11:56:04 2009; from:(FC 0); sensor:(0); event:asserted: HotSwap: FRU 0 M7->M4, Cause=0x4 Oct 26 11:56:04 2009; from:(FC 0); sensor:(FAN_PRESENT); event:asserted: 0x00 Oct 26 11:56:04 2009; from:(FC 0); sensor:(FAN_PRESENT); event:asserted: 0x01 Oct 26 11:56:04 2009; from:(FC 0); sensor:(FAN_PRESENT); event:asserted: 0x02 . . . #
Note - The output in the example is just a portion of the full output.