Documentation, Support, and Training
Understanding ILOM on the Switch
Administering ILOM (Web Interface)
Understanding Switch-Specific Commands
activate Command (switch-specific)
deactivate Command (switch-specific)
Enables or disables an IPMB link. Issued on the CMC.
setipmbstate IPMB_address A|B [link] 1|0 (in radial IPMB-0 environment)
setipmbstate IPMB_address A|B 1|0 (in bused IPMB-0 environment)
where:
IPMB_address is the IPMB bus address of the component.
link is the numeric value of the link (1–95).
This CLIA command enables or disables an IPMB link on the target IPM controller. The second argument defines the bus (IPMB-A or IPMB-B) to be enabled or disabled. The last argument defines the operation to be performed – 1 to enable link, 0 to disable link.
In a bused environment, and in a radial environment for target IPM controllers other than an IPMB hub, argument link is not used. For an IPMB hub controller in a radial environment, the argument link is optional.
If link is present, the command enables or disables the specific radial IPMB link (1 to 95). If link is omitted, the command enables or disables all the links on the IPMB hub in the radial system.
The following example shows how to disable the IPMB-A link on line card 8 at IPMB address 92 with the setimpbstate command.
# clia setipmbstate 92 A 0 Pigeon Point Shelf Manager Command Line Interpreter Command executed successfully #