Log In to Oracle ILOM Using a Local Serial Connection
You do not need to know the IP address of the service processor (SP) to log in
to Oracle ILOM locally.
Note -
To enable first-time login and access to Oracle ILOM, a default
Administrator account and its password are provided with the system. To
build a secure environment and enforce user authentication and authorization
in Oracle ILOM, you must change the default password
(
changeme) for the default Administrator account
(
root) after your initial login to Oracle ILOM. If
this default Administrator account has since been changed, contact your
system administrator for an Oracle ILOM user account with Administrator
privileges.
-
Ensure that the server is cabled for a local serial connection to Oracle
ILOM and that the power cords are connected to the power sources.
For instructions for establishing a serial management connection to Oracle
ILOM see Connect Cables and Power Cords.
When the power cords are connected to the power source, the server enters
Standby power mode. In Standby power mode, the server is not initialized or
powered-on.
-
Press Enter on the terminal device that is connected to the server.
-
At the Oracle ILOM login prompt, type your user name, and then press
Enter.
-
At the password prompt, type the password associated with your user name,
and then press Enter.
Oracle ILOM displays a default command prompt (->), indicating that you
have successfully logged in.