Go to main content

Oracle® Server X6-2L Installation Guide

Exit Print View

Updated: July 2018
 
 

Back Panel Status Indicators, Connectors, Drives, and PCIe Slots

This section shows the Oracle Server X6-2L back panel and the location of status indicators (LEDs), connectors, and PCIe slots.

For information about how to interpret the status indicators (LEDs), refer to the Oracle Server X6-2L Service Manual.


Note -  Systems that are configured with twelve and twenty-four front panel storage drives also can contain two rear-mounted storage drives. Systems that are configured with eight front panel storage drives do not contain rear-mounted storage drives.
image:Figure showing the back panel of the Oracle Server X6-2L.
Call Out
Description
1
Rear storage drive 0 (HDD/SSD)
2
Rear storage drive 1 (HDD/SSD)
3
Power supply unit 0 (PS0)
4
Power supply unit 1 (PS1)
5
PCIe slot 1 (Nonfunctional in single-processor systems.)
6
PCIe slot 2 (Nonfunctional in single-processor systems.)
7
PCIe slot 3 (Nonfunctional in single-processor systems. This slot is the default slot for the optional Oracle PCIe Switch Controller Card.)
8
Network (NET) 100/1000/10000 ports (NET3–NET0) (NET2 and NET3 are nonfunctional in single-processor systems.)
9
System status LEDs: Locator/Button: white; Service Required: amber; Power/OK: green
10
Serial management (SER MGT)/RJ-45 serial port
11
Oracle Integrated Lights Out Manager (ILOM) service processor (SP) network management 10/100/1000BASE-T port (NET MGT)
12
USB 2.0 ports (2)
13
DB-15 video connector
14
PCIe slot 4
15
PCIe slot 5
16
PCIe slot 6 (This slot is the default slot for the Oracle Storage 12 Gb/s SAS PCIe RAID HBA.)

Related Information