Installing the Mounting Brackets on a 7x20
Use the following procedure to install the mounting brackets on a 7420, 7320, or
7120 controller.
-
Position a mounting bracket against the chassis so that the slide rail lock is
at the front of the chassis, and the keyhole openings on the mounting bracket
are aligned with the locating pins on the side of the chassis.
The following graphic illustrates how to attach the 7120/7320 mounting
brackets.
-
The following graphic illustrates how to attach the 7x20 mounting
brackets.
-
With the heads of the four chassis locating pins protruding through the four
keyhole openings in the mounting bracket, pull the mounting-bracket toward the
front of the chassis until the mounting-bracket clip locks into place with an
audible click.
-
Verify that all mounting pins are securely fastened to the chassis.
-
Repeat to install the remaining mounting bracket on the other side of the
chassis.