Oracle^® Exadata Storage Server X7-2 EF and HC Service Manual

Power On the Server

As soon as you connect the power cords, Standby power is applied. In Standby power mode:

• The System OK LED on the server front panel blinks slowly.

• The SP OK LED indicator is steady on.

• The AC Power Supply indicator lights are steady on.

  Depending on the firmware configuration, the system might boot. If it does not boot, perform the following procedure.

• Power on the server to Main power mode by performing one of the following actions:
  • Press the On/Standby button on the front bezel.
  • Log in to the Oracle ILOM web interface, click Host Management → Power Control, and from the Select Action list, select Power On.
  • Log in to the Oracle ILOM command-line interface (CLI), and type the following command at the Oracle ILOM prompt:

    -> start /System
    

    When the server is powered on to Main power mode and the power-on self-test (POST) code checkpoint tests are complete, the green System OK LED status indicator on the front panel of the server lights and remains lit.

Related Information

• Powering Down the Server

• Reconnect Power and Data Cables