|Skip Navigation Links|
|Exit Print View|
|man pages section 1M: System Administration Commands Oracle Solaris 11 Information Library|
- administer files available as block devices through lofi
/usr/sbin/lofiadm -a file [device]
/usr/sbin/lofiadm -c crypto_algorithm -a file [device]
/usr/sbin/lofiadm -c crypto_algorithm -k raw_key_file -a file [device]
/usr/sbin/lofiadm -c crypto_algorithm -T token_key -a file [device]
/usr/sbin/lofiadm -c crypto_algorithm -T token_key -k wrapped_key_file -a file [device]
/usr/sbin/lofiadm -c crypto_algorithm -e -a file [device]
/usr/sbin/lofiadm -C algorithm [-s segment_size] file
/usr/sbin/lofiadm -d file | device
/usr/sbin/lofiadm -U file
/usr/sbin/lofiadm [ file | device]
lofiadm administers lofi, the loopback file driver. lofi allows a file to be associated with a block device. That file can then be accessed through the block device. This is useful when the file contains an image of some filesystem (such as a CD-ROM image), because the block device can then be used with the normal system utilities for mounting, checking or repairing file systems. See fsck(1M) and mount(1M).
Use lofiadm to add a file as a loopback device, remove such an association, or display information about the current associations.
Encryption and compression options are mutually exclusive on the command line. Further, an encrypted file cannot be compressed later, nor can a compressed file be encrypted later.
In the global zone, lofiadm can be used on both the global zone devices and all devices owned by other non-global zones on the system.
The following options are supported:
Add file as a block device.
If device is not specified, an available device is picked.
If device is specified, lofiadm attempts to assign it to file. device must be available or lofiadm will fail. The ability to specify a device is provided for use in scripts that wish to reestablish a particular set of associations.
Compress the file with the specified compression algorithm.
The gzip compression algorithm uses the same compression as the open-source gzip command. You can specify the gzip level by using the value gzip-N where N is 6 (fast) or 9 (best compression ratio). Currently, gzip, without a number, is equivalent to gzip-6 (which is also the default for the gzip command).
lzma stands for the LZMA (Lempel-Ziv-Markov) compression algorithm.
Note that you cannot write to a compressed file, nor can you mount a compressed file read/write.
Remove an association by file or device name, if the associated block device is not busy, and deallocates the block device.
The segment size to use to divide the file being compressed. segment_size can be an integer multiple of 512.
Uncompress a compressed file.
The following options are used when the file is encrypted:
Select the encryption algorithm. The algorithm must be specified when encryption is enabled because the algorithm is not stored in the disk image.
If none of -e, -k, or -T is specified, lofiadm prompts for a passphrase, with a minimum length of eight characters, to be entered . The passphrase is used to derive a symmetric encryption key using PKCS#5 PBKD2.
Path to raw or wrapped symmetric encryption key. If a PKCS#11 object is also given with the -T option, then the key is wrapped by that object. If -T is not specified, the key is used raw.
The key in a PKCS#11 token to use for the encryption or for unwrapping the key file.
If -k is also specified, -T identifies the unwrapping key, which must be an RSA private key.
Generate an ephemeral symmetric encryption key.
The following operands are supported:
One of: aes-128-cbc, aes-192-cbc, aes-256-cbc, des3-cbc, blowfish-cbc.
Display the file name associated with the block device device.
Without arguments, print a list of the current associations. Filenames must be valid absolute pathnames.
When a file is added, it is opened for reading or writing by root. Any restrictions apply (such as restricted root access over NFS). The file is held open until the association is removed. It is not actually accessed until the block device is used, so it will never be written to if the block device is only opened read-only.
Note that the filename might appear as a question mark (?) if it is not possible to resolve the path in the current context (for example, if it is an NFS path in a non-global zone).
Display the block device associated with file.
Path to a file of the appropriate length, in bits, to use as a raw symmetric encryption key.
PKCS#11 token object in the format:
All but the key label are optional and can be empty. For example, to specify a token object with only its key label MylofiKey, use:
Path to file containing a symmetric encryption key wrapped by the RSA private key specified by -T.
Example 1 Mounting an Existing CD-ROM Image
You should ensure that Solaris understands the image before creating the CD. lofi allows you to mount the image and see if it works.
This example mounts an existing CD-ROM image (sparc.iso), of the Red Hat 6.0 CD which was downloaded from the Internet. It was created with the mkisofs utility from the Internet.
Use lofiadm to attach a block device to it:
# lofiadm -a /home/mike_s/RH6.0/sparc.iso /dev/lofi/1
lofiadm picks the device and prints the device name to the standard output. You can run lofiadm again by issuing the following command:
# lofiadm Block Device File Options /dev/lofi/1 /home/mike_s/RH6.0/sparc.iso -
Or, you can give it one name and ask for the other, by issuing the following command:
# lofiadm /dev/lofi/1 /home/mike_s/RH6.0/sparc.iso
Use the mount command to mount the image:
# mount -F hsfs -o ro /dev/lofi/1 /mnt
Check to ensure that Solaris understands the image:
# df -k /mnt Filesystem kbytes used avail capacity Mounted on /dev/lofi/1 512418 512418 0 100% /mnt # ls /mnt ./ RedHat/ doc/ ls-lR rr_moved/ ../ TRANS.TBL dosutils/ ls-lR.gz sbin@ .buildlog bin@ etc@ misc/ tmp/ COPYING boot/ images/ mnt/ usr@ README boot.cat* kernels/ modules/ RPM-PGP-KEY dev@ lib@ proc/
Solaris can mount the CD-ROM image, and understand the filenames. The image was created properly, and you can now create the CD-ROM with confidence.
As a final step, unmount and detach the images:
# umount /mnt # lofiadm -d /dev/lofi/1 # lofiadm Block Device File Options
Example 2 Making a UFS Filesystem on a File
Making a UFS filesystem on a file can be useful, particularly if a test suite requires a scratch filesystem. It can be painful (or annoying) to have to repartition a disk just for the test suite, but you do not have to. You can newfs a file with lofi
Create the file:
# mkfile 35m /export/home/test
Attach it to a block device. You also get the character device that newfs requires, so newfs that:
# lofiadm -a /export/home/test /dev/lofi/1 # newfs /dev/rlofi/1 newfs: construct a new file system /dev/rlofi/1: (y/n)? y /dev/rlofi/1: 71638 sectors in 119 cylinders of 1 tracks, 602 sectors 35.0MB in 8 cyl groups (16 c/g, 4.70MB/g, 2240 i/g) super-block backups (for fsck -F ufs -o b=#) at: 32, 9664, 19296, 28928, 38560, 48192, 57824, 67456,
Note that ufs might not be able to use the entire file. Mount and use the filesystem:
# mount /dev/lofi/1 /mnt # df -k /mnt Filesystem kbytes used avail capacity Mounted on /dev/lofi/1 33455 9 30101 1% /mnt # ls /mnt ./ ../ lost+found/ # umount /mnt # lofiadm -d /dev/lofi/1
Example 3 Creating a PC (FAT) File System on a Unix File
The following series of commands creates a FAT file system on a Unix file. The file is associated with a block device created by lofiadm.
# mkfile 10M /export/test/testfs # lofiadm -a /export/test/testfs /dev/lofi/1 Note use of rlofi, not lofi, in following command. # mkfs -F pcfs -o nofdisk,size=20480 /dev/rlofi/1 Construct a new FAT file system on /dev/rlofi/1: (y/n)? y # mount -F pcfs /dev/lofi/1 /mnt # cd /mnt # df -k . Filesystem kbytes used avail capacity Mounted on /dev/lofi/1 10142 0 10142 0% /mnt
Example 4 Compressing an Existing CD-ROM Image
The following example illustrates compressing an existing CD-ROM image (solaris.iso), verifying that the image is compressed, and then uncompressing it.
# lofiadm -C gzip /export/home/solaris.iso
Use lofiadm to attach a block device to it:
# lofiadm -a /export/home/solaris.iso /dev/lofi/1
Check if the mapped image is compressed:
# lofiadm Block Device File Options /dev/lofi/1 /export/home/solaris.iso Compressed(gzip) /dev/lofi/2 /export/home/regular.iso -
Unmap the compressed image and uncompress it:
# lofiadm -d /dev/lofi/1 # lofiadm -U /export/home/solaris.iso
Example 5 Creating an Encrypted UFS File System on a File
This example is similar to the example of making a UFS filesystem on a file, above.
Create the file:
# mkfile 35m /export/home/test
Attach the file to a block device and specify that the file image is encrypted. As a result of this command, you obtain the character device, which is subsequently used by newfs:
# lofiadm -c aes-256-cbc -a /export/home/secrets Enter passphrase: My-M0th3r;l0v3s_m3+4lw4ys! (not echoed) Re-enter passphrase: My-M0th3r;l0v3s_m3+4lw4ys! (not echoed) /dev/lofi/1 # newfs /dev/rlofi/1 newfs: construct a new file system /dev/rlofi/1: (y/n)? y /dev/rlofi/1: 71638 sectors in 119 cylinders of 1 tracks, 602 sectors 35.0MB in 8 cyl groups (16 c/g, 4.70MB/g, 2240 i/g) super-block backups (for fsck -F ufs -o b=#) at: 32, 9664, 19296, 28928, 38560, 48192, 57824, 67456,
The mapped file system shows that encryption is enabled:
# lofiadm Block Device File Options /dev/lofi/1 /export/home/secrets Encrypted
Mount and use the filesystem:
# mount /dev/lofi/1 /mnt # cp moms_secret_*_recipe /mnt # ls /mnt ./ moms_secret_cookie_recipe moms_secret_soup_recipe ../ moms_secret_fudge_recipe moms_secret_stuffing_recipe lost+found/ moms_secret_meatloaf_recipe moms_secret_waffle_recipe # umount /mnt # lofiadm -d /dev/lofi/1
Subsequent attempts to map the filesystem with the wrong key or the wrong encryption algorithm will fail:
# lofiadm -c blowfish-cbc -a /export/home/secrets Enter passphrase: mommy (not echoed) Re-enter passphrase: mommy (not echoed) lofiadm: could not map file /root/lofi: Invalid argument # lofiadm Block Device File Options #
Attempts to map the filesystem without encryption will succeed, however attempts to mount and use the filesystem will fail:
# lofiadm -a /export/home/secrets /dev/lofi/1 # lofiadm Block Device File Options /dev/lofi/1 /export/home/secrets - # mount /dev/lofi/1 /mnt mount: /dev/lofi/1 is not this fstype #
See environ(5) for descriptions of the following environment variables that affect the execution of lofiadm: LC_CTYPE, LC_MESSAGES and NLSPATH.
The following exit values are returned:
An error occurred.
See attributes(5) for descriptions of the following attributes:
Just as you would not directly access a disk device that has mounted file systems, you should not access a file associated with a block device except through the lofi file driver. It might also be appropriate to ensure that the file has appropriate permissions to prevent such access.
The abilities of lofiadm, and who can use them, are controlled by the permissions of /dev/lofictl. Read-access allows query operations, such as listing all the associations. Write-access is required to do any state-changing operations, like adding an association. As shipped, /dev/lofictl is owned by root, in group sys, and mode 0644, so all users can do query operations but only root can change anything. The administrator can give users write-access, allowing them to add or delete associations, but that is very likely a security hole and should probably only be given to a trusted group.
When mounting a filesystem image, take care to use appropriate mount options. In particular, the nosuid mount option might be appropriate for UFS images whose origin is unknown. Also, some options might not be useful or appropriate, like logging or forcedirectio for UFS. For compatibility purposes, a raw device is also exported along with the block device. For example, newfs(1M) requires one.
The output of lofiadm (without arguments) might change in future releases.