Documentation, Support, and Training
Evaluating Product Compatibility
Form-Factor Physical Characteristics
Warranty and Technical Support
System Requirements and Options
Installing Optional Components
Preparing to Install the Blade Server
Power and Thermal Distribution
Required Cooling and Blade Impedance Curve
Local Network IP Addresses and Host Names
Connect the External I/O Cables
Connect Cables to a System Console Running the Oracle Solaris OS
Connect Cables to a System Console Not Running Oracle Solaris OS
Insert and Latch the Blade Server
Software and Firmware Upgrades
Software and Firmware Upgrades
Firmware and Blade Server Management
Creating a Boot Disk Server and Adding Clients
Create a Boot Server for Diskless Clients
Compact Flash Formatting for the Oracle Solaris OS
Multiplex Configuration of Zones 2 and 3
Advanced Rear Transition Module Connectors (Zone 3)
Locate Base MAC Address on Blade Server
Configuring and Using Serial Over LAN
Set Up Default Gateway IP Address
Create or Modify SOL User Name and Password
Shut Down OS and Deactivate the Blade Server
Power Off and Remove the Blade Server
Use the ShMM CLI to create or modify a user account and password for SOL sessions. Access to the commands are disabled from ipmitool. For detailed information about using the ShMM CLI and commands, refer to the Netra CT900 Server Administration and Reference Manual.
SOL implementation supports two users.
A mandatory null user with user ID 1 and a second user with user ID 2.
Default user name and password for user ID 2 is soluser and solpasswd.
The user name and password string should be null terminated.
The command expects 16 bytes.
Pad unused bytes with zeros.
The default user name and password can be used, or you can change the user name and password.