Set Up subnet Mask

1. Read the subnet mask to see if it is already set.

   # clia sendcmd board IPMB addr 0x0C 0x02 0x05 0x06 0x00 0x00

   where board IPMB is the blade server’s IPMB address, as in the following example.

   # clia sendcmd 0x9a 0x0C 0x02 0x05 0x06 0x00 0x00

2. If subnet mask is already set, skip to Set Up Default Gateway IP Address.
3. Enter the in progress command as follows:

   # clia sendcmd board IPMB addr 0x0C 0x01 0x05 0x00 0x01

4. Set the subnet mask as follows:

   # clia sendcmd board IPMB addr 0x0C 0x01 0x05 0x06 four subnet mask bytes

   as in the following example:

   # clia sendcmd 0x9a 0x0C 0x01 0x05 0x06 0xFF 0xFF 0xFF 0x00

Related Information

• Set Up Default Gateway IP Address