Understanding the Hardware Architecture
Understanding the Firmware and Software Environment
General Installation Site Guidelines
Reviewing the Physical Specifications
Reviewing the Power Requirements
Preparing the Unloading Route and Unpacking Area
Equipment Needed for Installation
Attach an Antistatic Wrist Strap
Optional Component Installation
Connecting the Front SP Cables
Connecting the Rear Power Cords and Data Cables
Prepare the Cable Routing Brackets
Connect the EMS Network Cables
Powering On the Server for the First Time
Connect Terminals or Emulators to the SP SER MGT Ports
Switch On the Facility Circuit Breakers
Set Oracle ILOM Network Addresses
Set the Altitude of the Server
Oracle Solaris OS Configuration Parameters
Additional Software Configuration and Testing
Understanding the System Architecture
Understanding PCIe Device Root Complexes
Understanding EMS SAS Paths to the Internal Drives
Understanding Internal Drive Device Paths
Understanding Network Port Device Paths
Understanding Configuration Guidelines
Understanding System Administration Resources
Understanding Platform-Specific Oracle ILOM Features
Oracle VM Server for SPARC Overview
Multipathing Software Overview
Oracle ILOM Remote System Console Plus Overview
Oracle Hardware Management Pack Overview
Oracle Enterprise Manager Ops Center
Time Synchronization and NTP Service
Multi-Domain Extensions to ILOM MIBs
Establish a Network Management Connection to Oracle ILOM
Switch Between the Oracle ILOM CLI and the System Console on a Host
Controlling the Server, Domains, and Devices
Resetting the Server, SP, or Domains
Managing the Server's Boot Behavior
Booting and Shutting Down the OS
Configuring Oracle ILOM User Accounts and Roles
Record Network Parameter Values
Viewing the Network Configuration
Administering CMUs, CMPs, and DIMMs
Administering IOUs and PCIe Device Root Complexes
Identifying Domain-Level Commands
Obtain the Server Serial Number
Viewing Server and Component Information
XSCF and Oracle ILOM Command Comparison
Identifying SP Configuration and Administration Commands
Identifying Domain Administration Commands
Identifying Internal Components
Component Service Task Reference
Interpreting Log Files and System Messages
Removing Power From the Server
Servicing Trim Panels and the Kick Plate
Trim Panel Service Preparation
Check a Service Processor Battery
Replace a Service Processor Battery
I/O Switch Board Configuration
Servicing Cable Management Assemblies
Remove a Cable Management Assembly
Install a Cable Management Assembly
Understanding I/O Card Slot Configuration
Understanding I/O Card Slot Device Paths and FRU Paths
Sun Flash Accelerator F40 and F80 PCIe Cards
Locate an I/O Card in the Server
Prepare an I/O Card For Removal
Remove an I/O Card From the Server
Remove an I/O Card From a Carrier
Install an I/O Card in a Carrier
Install an I/O Card in the Server
Remove a Filler Panel From the Server
Remove a Filler Panel From a Carrier
Install a Filler Panel in a Carrier
Install a Filler Panel in the Server
Relocate a Sun Flash Accelerator F40 PCIe Card
Understanding EMS Configurations
Determine Hard Drive Cage and EMS Part Numbers
Servicing HDDs, SSDs, and Drive Filler Panels
Understanding HDD and SSD Slot Configurations
CMU Upgrades in a SPARC M5-32 Server
Display General CMU Information
Display the CMU Quantity and Type
Unpacking and Inspecting a CMU
Servicing the Front Filler Panel
Install the Front Filler Panel
Servicing a Cabled Lower Bus Bar Assembly
Remove a Cabled Lower Bus Bar Assembly
Install a Cabled Lower Bus Bar Assembly
Servicing the Scalability Card Cage
Remove the Scalability Card Cage
Install the Scalability Card Cage
Servicing the Scalability Fans Cable
Remove the Scalability Fans Cable
Install the Scalability Fans Cable
Servicing the Power System Cage
Prepare to Replace Crown Clips on a Bus Bar
Return the Server to Operation
Servicing an I/O Power Cable Assembly
Remove an I/O Power Cable Assembly
Install an I/O Power Cable Assembly
Servicing the Scalability Assembly
Remove the Scalability Assembly
Install the Scalability Assembly
Servicing the Power System Cage to Scalability Assembly Cable
Remove the Power System Cage to Scalability Assembly Cable
Install the Power System Cage to Scalability Assembly Cable
Servicing the PSDB to Scalability Midplane Cable
Remove the PSDB to Scalability Midplane Cable
Install the PSDB to Scalability Midplane Cable
Servicing the Internal Link to Front LED Panel Cable
Remove the Internal Link Cable for the Front LED Panel
Install the Internal Link Cable for the Front LED Panel
Servicing the Rear LED Panel Cable
Remove the Rear LED Panel Cable
Install the Rear LED Panel Cable
Servicing Midplane Power Cables
Prepare to Remove a Midplane Power Cable
Install a Midplane Power Cable
Servicing the I/O Data Cable Assembly
Remove an I/O Data Cable Assembly
Install an I/O Data Cable Assembly
Prepare to Remove the Midplane
Prepare the Old Midplane for Return
Returning the Server to Operation
Oracle Safety Information
Drive Access With EMS SAS
SSB Configuration
Scalability, DCUs, and PDomains
Install the Scalability Assembly
Remove the Scalability Assembly
Servicing the Scalability Assembly
Install the Scalability Card Cage
Remove the Scalability Card Cage
Servicing the Scalability Card Cage
Install the Scalability Fans Cable
Remove the Scalability Fans Cable
Servicing the Scalability Fans Cable
Torque Reference
SP Cables
Connect the SP Cables
Connect Terminals or Emulators to the SP SER MGT Ports
Establish a Network Management Connection to Oracle ILOM
Log In to the SP (Local)
SP Cables
Connect Terminals or Emulators to the SP SER MGT Ports
Obtain the Server Serial Number
Set the Altitude of the Server
Enable or Disable Automatic Booting (ok Prompt)
Use a Metal Plate to Cross Gaps in the Floor
Heat Dissipation and Airflow Requirements
Controlling the Server, Domains, and Devices
Shipping Container Dimensions
Physical Dimensions
Power States
Handling Precautions
Display Server Information (Web Interface)
Locate the Server (CLI)
Locate the Server (Web Interface)
Determine the Server Model Type (CLI)
Moving the Server
Power States
Power On the Server
Server Power Consumption
Move the Server to the Installation Site
Move Server Up or Down a Ramp
Receive the Server
Reconnect AC Power to the Server
Reset the Server
Reset the Server (Oracle Solaris)
Returning the Server to Operation
Obtain the Server Serial Number
Lower the Leveling Feet
Power States
Installation and Service Area
Install a Service Processor
Service Processor LEDs
Service Processor Network Management Port LEDs
Service Processor LEDs
Remove a Service Processor
Replace a Service Processor Battery
Reset Service Processors
Servicing Service Processors
Component Service Task Reference
Servicing AC Input Filters
Servicing AC Power Cords
Servicing Bus Bars
Servicing Cabinet Doors
Servicing Cable Management Assemblies
Servicing Clock Boards
Remove a CMU
Servicing CMUs
Servicing Bus Bars
Servicing DIMMs
Servicing EMSs
Servicing Fan Cages
Servicing Fan Modules
Servicing the Fan Power Cable
Servicing the Front Filler Panel
Servicing the Front LED Panel
Servicing HDDs, SSDs, and Drive Filler Panels
Servicing Hard Drive Cages
Servicing HDDs, SSDs, and Drive Filler Panels
Servicing I/O Cards
Servicing the I/O Data Cable Assembly
Servicing I/O Switch Boards
Servicing the Internal Link to Front LED Panel Cable
Servicing IOUs
Servicing the Midplane
Servicing Midplane Power Cables
Servicing Power Supplies
Servicing the Power System Cage to Scalability Assembly Cable
Servicing PSDBs
Servicing the PSDB to Scalability Midplane Cable
Servicing the Rear LED Panel
Servicing the Rear LED Panel Cable
Servicing the Scalability Assembly
Servicing the Scalability Card Cage
Servicing the Scalability Fans Cable
Servicing Service Processors
Servicing SPPs
Servicing SSBs
Servicing HDDs, SSDs, and Drive Filler Panels
Sun Flash Accelerator F40 and F80 PCIe Cards
Set Oracle ILOM Network Addresses
Set the Altitude of the Server
Access Route Guidelines
Loading Dock and Receiving Area Requirements
Shipping Container Dimensions
Unpack the Server
Environmental Requirements
Display Installed Components List (CLI)
Clear a Fault
Shut Down the OS (shutdown Command)
Shutting Down the OS
Side Panels
Airborne Contaminates
SNMP Service
Installed Software
Set the Altitude of the Server
Configure SP Network Settings
Connect the SP Cables
Time Synchronization and NTP Service
SP and SPP Guidelines
Establish a Network Management Connection to Oracle ILOM
Connect Terminals or Emulators to the SP SER MGT Ports
SP Network Addresses
Log In to the Active SP
Logging In to Oracle ILOM (CLI)
Connect Terminals or Emulators to the SP SER MGT Ports
SP Cables
SP Cables
Log In to the Active SP
Log In to the Active SP
Route the SP Cables Down
Route the SP Cables Up
Connect Terminals or Emulators to the SP SER MGT Ports
SP Cables
Connect Terminals or Emulators to the SP SER MGT Ports
Configure SP Network Settings
Leveling Feet and Caster Dimensions
Installation and Service Area
Leveling Feet and Caster Dimensions
Mounting Holes and Cable Routing Floor Cutout Specifications
Power Cord Specifications
Power Supply Specifications
Physical Dimensions
Installation and Service Area
Shipping Container Dimensions
Unpacking Area
Specifying a PDomain Type
SPP Configuration
SPs and SPPs
Install an SPP
Rear Components
SP Network Addresses
SP Cables
Remove an SPP
Replace an SPP Battery
Servicing SPPs
SSB Configuration
Install an SSB
Front Components
Physical Domains
Remove an SSB
Servicing SSBs
Install an HDD
Removing an HDD
Servicing HDDs, SSDs, and Drive Filler Panels
Cable Management Devices
Power States
SP Cables
Switch Between the Oracle ILOM CLI and the System Console on a Host
Power On the Server
Power On
PDomain Monitoring Commands
Power Off
Sun Flash Accelerator F40 and F80 PCIe Cards
Switch Between the Oracle ILOM CLI and the System Console on a Host
Time Synchronization and NTP Service
System Status LEDs
Set the Altitude of the Server
Accessing the Server
View Log Files (Oracle Solaris)