In this example, DCU0 and DCU1 are assigned to PDomain_0, and DCU2 and DCU_3 are assigned to PDomain_1. Follow these steps to move DCU3 to PDomain_0.
Note - Changing a PDomain configuration might require you to reconfigure the system's boot disks. See Managing the Server's Boot Behavior for more information.
This example stops PDomain_1.
-> stop /Servers/PDomains/PDomain_1/HOST Are you sure you want to stop /Servers/PDomains/PDomain_1/HOST/console (y/n) ? y Stopping /Servers/PDomains/PDomain_1/HOST ->
This example assigns DCU2 to PDomain_1, effectively removing DCU3 from the PDomain.
-> set /Servers/PDomains/PDomain_1/HOST dcus_assigned="/SYS/DCU2" Set 'dcus_assigned' to 'DCU2' ->
This example verifies that DCU2 remains in the list of DCUs that can be assigned to PDomain_1.
-> show /Servers/PDomains/PDomain_1/HOST dcus_assignable /Servers/PDomains/PDomain_1/HOST Properties: dcus_assignable = /SYS/DCU0 /SYS/DCU1 /SYS/DCU2 /SYS/DCU3
This example stops PDomain_0.
-> stop /Servers/PDomains/PDomain_0/HOST Are you sure you want to stop /Servers/PDomains/PDomain_0/HOST (y/n)? y Stopping /Servers/PDomain_0/HOST ->
This example verifies that DCU3 appears in the list of DCUs that can be assigned to PDomain_0. If the desired DCU does not appear in the list of DCUs that can be assigned, assign it as shown in Step 2.
-> show /Servers/PDomains/PDomain_0/HOST dcus_assignable /Servers/PDomains/PDomain_0/HOST Properties: dcus_assignable = /SYS/DCU0 /SYS/DCU1 /SYS/DCU2 /SYS/DCU3
This example reassigns DCU3 to PDomain_0 in addition to DCU0 and DCU1, which were previously available for assignment to the PDomain.
-> set /Servers/PDomains/PDomain_0/HOST dcus_assigned="/SYS/DCU0 /SYS/DCU1 /SYS/DCU3" Set dcus_assigned to /SYS/DCU0 /SYS/DCU1 /SYS/DCU3
-> start /Servers/PDomains/PDomain_1/HOST Are you sure you want to start /Servers/PDomains/PDomain_1/HOST/ (y/n) ? y Starting /Servers/PDomains/PDomain_1/HOST ->