Back Panel Features
The following figure shows the Sun Server X4-8 back panel and describes its
components.
|
|
1
|
DB-15 video port
|
2
|
USB 2.0 ports (2)
|
3
|
Net management port
|
4
|
Serial management port
|
5
|
Status indicators
|
6
|
HDD/SSD slots 0 through 7:
-
Top row : 7, 5, 3, 1
-
Bottom row: 6, 4, 2, 0
|
7
|
PCIe card slots 1 through16:
-
PCIe 1 is on the right
-
PCIe 16 is on the left
PCIe cards are mounted on dual PCIe card carriers (DPCC). Each
DPCC houses two PCIe slots.
|
8
|
Net 0 port
|
9
|
Net 1 port
|
10
|
AC inputs with cable clips (0 through 3 ):
|
|
Back Panel Status Indicators and Buttons
The following figure shows the back panel indicators and buttons.
|
|
1
|
Non-maskable interrupt (NMI) button - Used by Oracle service
personnel.
|
2
|
Reset button - Used by Oracle service personnel.
|
3
|
Locate button/indicator - Used to identify the server. For
details, see the Oracle ILOM Documentation
Library at:
|
4
|
|
5
|
|
6
|
SP OK (Green indicator) - Steady on if SP is operating, blinks
while SP is booting, off if SP has no power.
|
7
|
SP reset button - Used by Oracle service personnel.
|
8
|
SMOD fault indicator- Indicates a system module (SMOD) fault
(Amber)
|
9
|
HBA fault indicator - Indicates a host bus adaptor (HBA) fault
(Amber)
|
|
Storage Controls and Indicators
The following figure shows the storage controls and indicators:
|
|
1
|
OK indicator (Green)
|
2
|
Fault indicator (Amber)
|
3
|
Ready to remove indicator (Blue)
|
4
|
Storage drive release button
|
5
|
Storage drive lever
|
|