|
|
100
|
No controllers available.
|
101
|
Controller does not support RAID.
|
102
|
No physical disks associated with controller.
|
103
|
Invalid controller.
|
104
|
Invalid disk.
|
105
|
Invalid RAID volume.
|
106
|
RAID level not supported by controller.
|
107
|
Default RAID level not supported.
|
108
|
A defined disk is in use.
|
109
|
Number of disks exceeds allowed number for this level.
|
110
|
Failure retrieving internal data.
|
111
|
Number of disks requested exceeds the number of available disks.
|
112
|
Cannot define both actual and requested number of disks.
|
113
|
Option not supported by controller.
|
114
|
Invalid stripe size for controller.
|
115
|
Invalid number of subarrays.
|
116
|
Cannot retrieve RAID data.
|
118
|
RAID creation failure.
|
119
|
RAID deletion failure.
|
120
|
Disk defined multiple times.
|
121
|
Disks must be in the same controller.
|
122
|
The maximum number of RAID Volumes has been created.
|
123
|
Invalid RAID configuration.
|
124
|
The RAID Volume is in use.
|
125
|
Incomplete RAID configuration.
|
126
|
Failure writing internal data.
|
127
|
Command requires disks to be entered.
|
128
|
Disk is not a dedicated spare.
|
129
|
Disk is not a global spare.
|
130
|
Controller does not support dedicated spares.
|
131
|
Controller does not support global spares.
|
132
|
Command requires disks or RAID volume to be entered.
|
133
|
A defined disk is not in a RAID volume.
|
134
|
Cannot set both read and write cache in same command.
|
135
|
Import could not create RAID volumes or spares - disks may be in use.
|
136
|
Subarrays option is required for this RAID level.
|
137
|
Incomplete command, no options have been supplied.
|
138
|
Number of disks requested exceeds the number of available disks with the same capacity.
|
139
|
RAID configuration does not have enough disks for the requested RAID level.
|
140
|
RAID configuration has too many disks for the requested RAID level.
|
141
|
Disk detected as in use by another controller. Use raidconfig restore or clear command.
|
142
|
The number of spares exceeds the maximum allowed by controller.
|
143
|
This command does not support the number-disks option.
|
144
|
Task type is invalid.
|
145
|
Task type must be defined.
|
146
|
Task type is only valid for disks.
|
147
|
Task type is only valid for RAID Volumes.
|
148
|
For this task, disk must not be in use.
|
149
|
For this task, disk must be in a RAID Volume.
|
150
|
Command currently cannot be executed.
|
151
|
The source disk must be in a RAID Volume.
|
152
|
The destination disk must not be in a RAID Volume.
|
153
|
The source and destination cannot be the same disk.
|
154
|
No foreign configuration detected for controller.
|
155
|
Unable to add disk to RAID Volume.
|
156
|
Task cannot be started, make sure task is listed in Startable Tasks.
|
157
|
Task cannot be stopped, make sure task is listed in Stoppable Tasks.
|
158
|
Invalid command, filename must come before options.
|
159
|
All disks must be the same size.
|
160
|
Command is not valid for this RAID level.
|
161
|
Subdisk sizes must be less than disk capacity.
|
162
|
Could not restore controller configuration.
|