The list command does the following:
Displays the version of firmware for all components
Tells you whether the target device can be updated with the XML metadata file
Saves the configuration information to a specified XML file
This information can be used to check the state of a device before executing a firmware upgrade and can be used to verify that a firmware update has been successful.
The list options are listed in the following table.
|
The list command has two types of targets: the first lists the configuration of devices on the system or supported by a file, and the second lists the features supported by fwupdate.
The following supported targets for the list subcommand represent all of the supported component types that can be upgraded by fwupdate:
all
disk
expander
controller
bridge
sp_bios
For example, use the all option to view all of the devices that can be updated using the XML metadata file.
The following supported targets for the list command represent the devices that can be upgraded by fwupdate:
supported-targets
supported-images
error-codes
For example, use the supported-targets option to view all of the types of target device that can be updated using fwupdate.
The following information is displayed with the list command for the following targets. Items marked with an asterisk (*) are displayed in verbose listing.
SP BIOS
ID
Product Name
ILOM Version
BIOS/OBP Version
XML Support
Controllers
ID
Type
Manufacturer
Mode
Product Name
Firmware (F/W) Version
BIOS version
EFI Version
FCODE Version
Package Version
NVDATA Version
XML Support
NODE ID*
Part Number*
PCI Address*
PCI Vendor ID*
WWN*
Disk
ID
Manufacturer
Model
Chassis
Slot
Type
Media
Size
Firmware (FW) Version
XML Support
NODE ID*
WWN*
Expander
ID
Chassis
Slot
Manufacturer
Model
Expander Name
Firmware (F/W) Version
XML Support
NODE ID*
Product Revision*
WWN*
Bridge
ID
Chassis
Slot
Manufacturer
Model
Firmware (F/W) Version
Att FW Version
XML Support
NODE ID*
WWN*