SER MGT Port

The SER MGT RJ-45 port, located on the rear panel, provides an TIA/EIA-232 serial Oracle/Cisco standard connection to the SP. For DTE-to-DTE communications, you can use the supplied RJ-45 to DB-9 crossover adapter with a standard RJ-45 cable to achieve the required null modem configuration.

By default, this port is configured with these parameters:

• 8N1– eight data bits, no parity, one stop bit

• 9600 baud

• Disable hardware flow control (CTS/RTS)

• Disable software flow control (XON/XOFF)

Pin Signal Description Pin Signal Description 1 Clear to Send 5 Ground 2 Data Carrier Detect 6 Receive Data 3 Transmit Data 7 Data Terminal Ready 4 Ground 8 Ready to Send

Related Information

• Available Connections

• Rear Panel Components (Installation)

• NET MGT Port

• 10 Gigabit Ethernet Ports

• USB Ports

• Video Port