Netra Server X5-2 Installation Guide

Exit Print View

Updated: June 2016
 
 

10 Gigabit Ethernet Ports

The server has four RJ-45 10-Gigabit Ethernet (10GbE) network connectors, labeled NET 3, NET 2, NET 1, and NET 0 (left to right) on the rear panel. Use these ports to connect the server to the network.

The LEDs located above each NET port are Link/Activity (left) and Speed (right) indicators for each port as described in this table:

Connection Type
IEEE Terminology
Speed LED Color
Transfer Rate
Fast Ethernet
100BASE-TX
Off
100 Mbits/sec
Gigabit Ethernet
1000BASE-T
Amber
1000 Mbits/sec
10 Gigabit Ethernet
10GBASE-T
Green
10000 Mbits/sec

Note -  The Oracle ILOM sideband management feature enables you to access the SP using one of these Ethernet ports. Refer to the Oracle ILOM Administor's Guide for Configuration and Maintenance For Release 3.2.x at http://www.oracle.com/goto/ilom321/docs for instructions.
image:Figure showing the pin numbering of a Gigabit Ethernet port.
Pin
Signal Description
Pin
Signal Description
1
Transmit/Receive Data 0 +
5
Transmit/Receive Data 2 -
2
Transmit/Receive Data 0 -
6
Transmit/Receive Data 1 -
3
Transmit/Receive Data 1 +
7
Transmit/Receive Data 3 +
4
Transmit/Receive Data 2 +
8
Transmit/Receive Data 3 -

Related Information