zshparam
(1)
名称
zshparam - zsh parameters
用法概要
Please see following description for synopsis
描述
User Commands ZSHPARAM(1)
NAME
zshparam - zsh parameters
DESCRIPTION
A parameter has a name, a value, and a number of attributes.
A name may be any sequence of alphanumeric characters and
underscores, or the single characters `*', `@', `#', `?',
`-', `$', or `!'. The value may be a scalar (a string), an
integer, an array (indexed numerically), or an associative
array (an unordered set of name-value pairs, indexed by
name). To declare the type of a parameter, or to assign a
scalar or integer value to a parameter, use the typeset
builtin.
The value of a scalar or integer parameter may also be
assigned by writing:
name=value
If the integer attribute, -i, is set for name, the value is
subject to arithmetic evaluation. Furthermore, by replacing
`=' with `+=', a parameter can be added or appended to. See
the section `Array Parameters' for additional forms of
assignment.
To refer to the value of a parameter, write `$name' or
`${name}'. See Parameter Expansion in zshexpn(1) for com-
plete details.
In the parameter lists that follow, the mark `<S>' indicates
that the parameter is special. Special parameters cannot
have their type changed or their readonly attribute turned
off, and if a special parameter is unset, then later recre-
ated, the special properties will be retained. `<Z>' indi-
cates that the parameter does not exist when the shell ini-
tializes in sh or ksh emulation mode.
ARRAY PARAMETERS
To assign an array value, write one of:
set -A name value ...
name=(value ...)
If no parameter name exists, an ordinary array parameter is
created. If the parameter name exists and is a scalar, it
is replaced by a new array. Ordinary array parameters may
also be explicitly declared with:
typeset -a name
Associative arrays must be declared before assignment, by
using:
zsh 5.0.5 Last change: January 5, 2014 1
User Commands ZSHPARAM(1)
typeset -A name
When name refers to an associative array, the list in an
assignment is interpreted as alternating keys and values:
set -A name key value ...
name=(key value ...)
Every key must have a value in this case. Note that this
assigns to the entire array, deleting any elements that do
not appear in the list.
To create an empty array (including associative arrays), use
one of:
set -A name
name=()
Array Subscripts
Individual elements of an array may be selected using a sub-
script. A subscript of the form `[exp]' selects the single
element exp, where exp is an arithmetic expression which
will be subject to arithmetic expansion as if it were sur-
rounded by `$((...))'. The elements are numbered beginning
with 1, unless the KSH_ARRAYS option is set in which case
they are numbered from zero.
Subscripts may be used inside braces used to delimit a
parameter name, thus `${foo[2]}' is equivalent to `$foo[2]'.
If the KSH_ARRAYS option is set, the braced form is the only
one that works, as bracketed expressions otherwise are not
treated as subscripts.
If the KSH_ARRAYS option is not set, then by default
accesses to an array element with a subscript that evaluates
to zero return an empty string, while an attempt to write
such an element is treated as an error. For backward com-
patibility the KSH_ZERO_SUBSCRIPT option can be set to cause
subscript values 0 and 1 to be equivalent; see the descrip-
tion of the option in zshoptions(1).
The same subscripting syntax is used for associative arrays,
except that no arithmetic expansion is applied to exp. How-
ever, the parsing rules for arithmetic expressions still
apply, which affects the way that certain special characters
must be protected from interpretation. See Subscript Pars-
ing below for details.
A subscript of the form `[*]' or `[@]' evaluates to all ele-
ments of an array; there is no difference between the two
except when they appear within double quotes. `"$foo[*]"'
evaluates to `"$foo[1] $foo[2] ..."', whereas `"$foo[@]"'
zsh 5.0.5 Last change: January 5, 2014 2
User Commands ZSHPARAM(1)
evaluates to `"$foo[1]" "$foo[2]" ...'. For associative
arrays, `[*]' or `[@]' evaluate to all the values, in no
particular order. Note that this does not substitute the
keys; see the documentation for the `k' flag under Parameter
Expansion Flags in zshexpn(1) for complete details. When an
array parameter is referenced as `$name' (with no subscript)
it evaluates to `$name[*]', unless the KSH_ARRAYS option is
set in which case it evaluates to `${name[0]}' (for an asso-
ciative array, this means the value of the key `0', which
may not exist even if there are values for other keys).
A subscript of the form `[exp1,exp2]' selects all elements
in the range exp1 to exp2, inclusive. (Associative arrays
are unordered, and so do not support ranges.) If one of the
subscripts evaluates to a negative number, say -n, then the
nth element from the end of the array is used. Thus
`$foo[-3]' is the third element from the end of the array
foo, and `$foo[1,-1]' is the same as `$foo[*]'.
Subscripting may also be performed on non-array values, in
which case the subscripts specify a substring to be
extracted. For example, if FOO is set to `foobar', then
`echo $FOO[2,5]' prints `ooba'.
Array Element Assignment
A subscript may be used on the left side of an assignment
like so:
name[exp]=value
In this form of assignment the element or range specified by
exp is replaced by the expression on the right side. An
array (but not an associative array) may be created by
assignment to a range or element. Arrays do not nest, so
assigning a parenthesized list of values to an element or
range changes the number of elements in the array, shifting
the other elements to accommodate the new values. (This is
not supported for associative arrays.)
This syntax also works as an argument to the typeset com-
mand:
typeset "name[exp]"=value
The value may not be a parenthesized list in this case; only
single-element assignments may be made with typeset. Note
that quotes are necessary in this case to prevent the brack-
ets from being interpreted as filename generation operators.
The noglob precommand modifier could be used instead.
To delete an element of an ordinary array, assign `()' to
that element. To delete an element of an associative array,
zsh 5.0.5 Last change: January 5, 2014 3
User Commands ZSHPARAM(1)
use the unset command:
unset "name[exp]"
Subscript Flags
If the opening bracket, or the comma in a range, in any sub-
script expression is directly followed by an opening paren-
thesis, the string up to the matching closing one is consid-
ered to be a list of flags, as in `name[(flags)exp]'.
The flags s, n and b take an argument; the delimiter is
shown below as `:', but any character, or the matching pairs
`(...)', `{...}', `[...]', or `<...>', may be used, but note
that `<...>' can only be used if the subscript is inside a
double quoted expression or a parameter substitution
enclosed in braces as otherwise the expression is inter-
preted as a redirection.
The flags currently understood are:
w If the parameter subscripted is a scalar then this flag
makes subscripting work on words instead of characters.
The default word separator is whitespace. This flag
may not be used with the i or I flag.
s:string:
This gives the string that separates words (for use
with the w flag). The delimiter character : is arbi-
trary; see above.
p Recognize the same escape sequences as the print
builtin in the string argument of a subsequent `s'
flag.
f If the parameter subscripted is a scalar then this flag
makes subscripting work on lines instead of characters,
i.e. with elements separated by newlines. This is a
shorthand for `pws:\n:'.
r Reverse subscripting: if this flag is given, the exp is
taken as a pattern and the result is the first matching
array element, substring or word (if the parameter is
an array, if it is a scalar, or if it is a scalar and
the `w' flag is given, respectively). The subscript
used is the number of the matching element, so that
pairs of subscripts such as `$foo[(r)??,3]' and
`$foo[(r)??,(r)f*]' are possible if the parameter is
not an associative array. If the parameter is an asso-
ciative array, only the value part of each pair is com-
pared to the pattern, and the result is that value.
zsh 5.0.5 Last change: January 5, 2014 4
User Commands ZSHPARAM(1)
If a search through an ordinary array failed, the
search sets the subscript to one past the end of the
array, and hence ${array[(r)pattern]} will substitute
the empty string. Thus the success of a search can be
tested by using the (i) flag, for example (assuming the
option KSH_ARRAYS is not in effect):
[[ ${array[(i)pattern]} -le ${#array} ]]
If KSH_ARRAYS is in effect, the -le should be replaced
by -lt.
R Like `r', but gives the last match. For associative
arrays, gives all possible matches. May be used for
assigning to ordinary array elements, but not for
assigning to associative arrays. On failure, for nor-
mal arrays this has the effect of returning the element
corresponding to subscript 0; this is empty unless one
of the options KSH_ARRAYS or KSH_ZERO_SUBSCRIPT is in
effect.
Note that in subscripts with both `r' and `R' pattern
characters are active even if they were substituted for
a parameter (regardless of the setting of GLOB_SUBST
which controls this feature in normal pattern match-
ing). The flag `e' can be added to inhibit pattern
matching. As this flag does not inhibit other forms of
substitution, care is still required; using a parameter
to hold the key has the desired effect:
key2='original key'
print ${array[(Re)$key2]}
i Like `r', but gives the index of the match instead;
this may not be combined with a second argument. On
the left side of an assignment, behaves like `r'. For
associative arrays, the key part of each pair is com-
pared to the pattern, and the first matching key found
is the result. On failure substitutes the length of
the array plus one, as discussed under the description
of `r', or the empty string for an associative array.
I Like `i', but gives the index of the last match, or all
possible matching keys in an associative array. On
failure substitutes 0, or the empty string for an asso-
ciative array. This flag is best when testing for val-
ues or keys that do not exist.
k If used in a subscript on an associative array, this
flag causes the keys to be interpreted as patterns, and
returns the value for the first key found where exp is
matched by the key. Note this could be any such key as
zsh 5.0.5 Last change: January 5, 2014 5
User Commands ZSHPARAM(1)
no ordering of associative arrays is defined. This
flag does not work on the left side of an assignment to
an associative array element. If used on another type
of parameter, this behaves like `r'.
K On an associative array this is like `k' but returns
all values where exp is matched by the keys. On other
types of parameters this has the same effect as `R'.
n:expr:
If combined with `r', `R', `i' or `I', makes them give
the nth or nth last match (if expr evaluates to n).
This flag is ignored when the array is associative.
The delimiter character : is arbitrary; see above.
b:expr:
If combined with `r', `R', `i' or `I', makes them begin
at the nth or nth last element, word, or character (if
expr evaluates to n). This flag is ignored when the
array is associative. The delimiter character : is
arbitrary; see above.
e This flag causes any pattern matching that would be
performed on the subscript to use plain string matching
instead. Hence `${array[(re)*]}' matches only the
array element whose value is *. Note that other forms
of substitution such as parameter substitution are not
inhibited.
This flag can also be used to force * or @ to be inter-
preted as a single key rather than as a reference to
all values. It may be used for either purpose on the
left side of an assignment.
See Parameter Expansion Flags (zshexpn(1)) for additional
ways to manipulate the results of array subscripting.
Subscript Parsing
This discussion applies mainly to associative array key
strings and to patterns used for reverse subscripting (the
`r', `R', `i', etc. flags), but it may also affect parameter
substitutions that appear as part of an arithmetic expres-
sion in an ordinary subscript.
It is possible to avoid the use of subscripts in assignments
to associative array elements by using the syntax:
aa+=('key with "*strange*" characters' 'value string')
This adds a new key/value pair if the key is not already
present, and replaces the value for the existing key if it
zsh 5.0.5 Last change: January 5, 2014 6
User Commands ZSHPARAM(1)
is.
The basic rule to remember when writing a subscript expres-
sion is that all text between the opening `[' and the clos-
ing `]' is interpreted as if it were in double quotes (see
zshmisc(1)). However, unlike double quotes which normally
cannot nest, subscript expressions may appear inside dou-
ble-quoted strings or inside other subscript expressions (or
both!), so the rules have two important differences.
The first difference is that brackets (`[' and `]') must
appear as balanced pairs in a subscript expression unless
they are preceded by a backslash (`\'). Therefore, within a
subscript expression (and unlike true double-quoting) the
sequence `\[' becomes `[', and similarly `\]' becomes `]'.
This applies even in cases where a backslash is not normally
required; for example, the pattern `[^[]' (to match any
character other than an open bracket) should be written
`[^\[]' in a reverse-subscript pattern. However, note that
`\[^\[\]' and even `\[^[]' mean the same thing, because
backslashes are always stripped when they appear before
brackets!
The same rule applies to parentheses (`(' and `)') and
braces (`{' and `}'): they must appear either in balanced
pairs or preceded by a backslash, and backslashes that pro-
tect parentheses or braces are removed during parsing. This
is because parameter expansions may be surrounded by bal-
anced braces, and subscript flags are introduced by balanced
parentheses.
The second difference is that a double-quote (`"') may
appear as part of a subscript expression without being pre-
ceded by a backslash, and therefore that the two characters
`\"' remain as two characters in the subscript (in true dou-
ble-quoting, `\"' becomes `"'). However, because of the
standard shell quoting rules, any double-quotes that appear
must occur in balanced pairs unless preceded by a backslash.
This makes it more difficult to write a subscript expression
that contains an odd number of double-quote characters, but
the reason for this difference is so that when a subscript
expression appears inside true double-quotes, one can still
write `\"' (rather than `\\\"') for `"'.
To use an odd number of double quotes as a key in an assign-
ment, use the typeset builtin and an enclosing pair of dou-
ble quotes; to refer to the value of that key, again use
double quotes:
typeset -A aa
typeset "aa[one\"two\"three\"quotes]"=QQQ
print "$aa[one\"two\"three\"quotes]"
zsh 5.0.5 Last change: January 5, 2014 7
User Commands ZSHPARAM(1)
It is important to note that the quoting rules do not change
when a parameter expansion with a subscript is nested inside
another subscript expression. That is, it is not necessary
to use additional backslashes within the inner subscript
expression; they are removed only once, from the innermost
subscript outwards. Parameters are also expanded from the
innermost subscript first, as each expansion is encountered
left to right in the outer expression.
A further complication arises from a way in which subscript
parsing is not different from double quote parsing. As in
true double-quoting, the sequences `\*', and `\@' remain as
two characters when they appear in a subscript expression.
To use a literal `*' or `@' as an associative array key, the
`e' flag must be used:
typeset -A aa
aa[(e)*]=star
print $aa[(e)*]
A last detail must be considered when reverse subscripting
is performed. Parameters appearing in the subscript expres-
sion are first expanded and then the complete expression is
interpreted as a pattern. This has two effects: first,
parameters behave as if GLOB_SUBST were on (and it cannot be
turned off); second, backslashes are interpreted twice, once
when parsing the array subscript and again when parsing the
pattern. In a reverse subscript, it's necessary to use four
backslashes to cause a single backslash to match literally
in the pattern. For complex patterns, it is often easiest
to assign the desired pattern to a parameter and then refer
to that parameter in the subscript, because then the back-
slashes, brackets, parentheses, etc., are seen only when the
complete expression is converted to a pattern. To match the
value of a parameter literally in a reverse subscript,
rather than as a pattern, use `${(q)name}' (see zshexpn(1))
to quote the expanded value.
Note that the `k' and `K' flags are reverse subscripting for
an ordinary array, but are not reverse subscripting for an
associative array! (For an associative array, the keys in
the array itself are interpreted as patterns by those flags;
the subscript is a plain string in that case.)
One final note, not directly related to subscripting: the
numeric names of positional parameters (described below) are
parsed specially, so for example `$2foo' is equivalent to
`${2}foo'. Therefore, to use subscript syntax to extract a
substring from a positional parameter, the expansion must be
surrounded by braces; for example, `${2[3,5]}' evaluates to
the third through fifth characters of the second positional
parameter, but `$2[3,5]' is the entire second parameter
zsh 5.0.5 Last change: January 5, 2014 8
User Commands ZSHPARAM(1)
concatenated with the filename generation pattern `[3,5]'.
POSITIONAL PARAMETERS
The positional parameters provide access to the command-line
arguments of a shell function, shell script, or the shell
itself; see the section `Invocation', and also the section
`Functions'. The parameter n, where n is a number, is the
nth positional parameter. The parameter `$0' is a special
case, see the section `Parameters Set By The Shell'.
The parameters *, @ and argv are arrays containing all the
positional parameters; thus `$argv[n]', etc., is equivalent
to simply `$n'. Note that the options KSH_ARRAYS or
KSH_ZERO_SUBSCRIPT apply to these arrays as well, so with
either of those options set, `${argv[0]}' is equivalent to
`$1' and so on.
Positional parameters may be changed after the shell or
function starts by using the set builtin, by assigning to
the argv array, or by direct assignment of the form
`n=value' where n is the number of the positional parameter
to be changed. This also creates (with empty values) any of
the positions from 1 to n that do not already have values.
Note that, because the positional parameters form an array,
an array assignment of the form `n=(value ...)' is allowed,
and has the effect of shifting all the values at positions
greater than n by as many positions as necessary to accommo-
date the new values.
LOCAL PARAMETERS
Shell function executions delimit scopes for shell parame-
ters. (Parameters are dynamically scoped.) The typeset
builtin, and its alternative forms declare, integer, local
and readonly (but not export), can be used to declare a
parameter as being local to the innermost scope.
When a parameter is read or assigned to, the innermost
existing parameter of that name is used. (That is, the
local parameter hides any less-local parameter.) However,
assigning to a non-existent parameter, or declaring a new
parameter with export, causes it to be created in the outer-
most scope.
Local parameters disappear when their scope ends. unset can
be used to delete a parameter while it is still in scope;
any outer parameter of the same name remains hidden.
Special parameters may also be made local; they retain their
special attributes unless either the existing or the
newly-created parameter has the -h (hide) attribute. This
may have unexpected effects: there is no default value, so
if there is no assignment at the point the variable is made
zsh 5.0.5 Last change: January 5, 2014 9
User Commands ZSHPARAM(1)
local, it will be set to an empty value (or zero in the case
of integers). The following:
typeset PATH=/new/directory:$PATH
is valid for temporarily allowing the shell or programmes
called from it to find the programs in /new/directory inside
a function.
Note that the restriction in older versions of zsh that
local parameters were never exported has been removed.
PARAMETERS SET BY THE SHELL
The following parameters are automatically set by the shell:
! <S>
The process ID of the last command started in the back-
ground with &, or put into the background with the bg
builtin.
# <S>
The number of positional parameters in decimal. Note
that some confusion may occur with the syntax $#param
which substitutes the length of param. Use ${#} to
resolve ambiguities. In particular, the sequence
`$#-...' in an arithmetic expression is interpreted as
the length of the parameter -, q.v.
ARGC <S> <Z>
Same as #.
$ <S>
The process ID of this shell. Note that this indicates
the original shell started by invoking zsh; all pro-
cesses forked from the shells without executing a new
program, such as subshells started by (...), substitute
the same value.
- <S>
Flags supplied to the shell on invocation or by the set
or setopt commands.
* <S>
An array containing the positional parameters.
argv <S> <Z>
Same as *. Assigning to argv changes the local posi-
tional parameters, but argv is not itself a local
parameter. Deleting argv with unset in any function
deletes it everywhere, although only the innermost
positional parameter array is deleted (so * and @ in
other scopes are not affected).
zsh 5.0.5 Last change: January 5, 2014 10
User Commands ZSHPARAM(1)
@ <S>
Same as argv[@], even when argv is not set.
? <S>
The exit status returned by the last command.
0 <S>
The name used to invoke the current shell. If the
FUNCTION_ARGZERO option is set, this is set temporarily
within a shell function to the name of the function,
and within a sourced script to the name of the script.
status <S> <Z>
Same as ?.
pipestatus <S> <Z>
An array containing the exit statuses returned by all
commands in the last pipeline.
_ <S>
The last argument of the previous command. Also, this
parameter is set in the environment of every command
executed to the full pathname of the command.
CPUTYPE
The machine type (microprocessor class or machine
model), as determined at run time.
EGID <S>
The effective group ID of the shell process. If you
have sufficient privileges, you may change the effec-
tive group ID of the shell process by assigning to this
parameter. Also (assuming sufficient privileges), you
may start a single command with a different effective
group ID by `(EGID=gid; command)'
EUID <S>
The effective user ID of the shell process. If you
have sufficient privileges, you may change the effec-
tive user ID of the shell process by assigning to this
parameter. Also (assuming sufficient privileges), you
may start a single command with a different effective
user ID by `(EUID=uid; command)'
ERRNO <S>
The value of errno (see errno(3)) as set by the most
recently failed system call. This value is system
dependent and is intended for debugging purposes. It
is also useful with the zsh/system module which allows
the number to be turned into a name or message.
GID <S>
zsh 5.0.5 Last change: January 5, 2014 11
User Commands ZSHPARAM(1)
The real group ID of the shell process. If you have
sufficient privileges, you may change the group ID of
the shell process by assigning to this parameter. Also
(assuming sufficient privileges), you may start a sin-
gle command under a different group ID by `(GID=gid;
command)'
HISTCMD
The current history line number in an interactive
shell, in other words the line number for the command
that caused $HISTCMD to be read.
HOST The current hostname.
LINENO <S>
The line number of the current line within the current
script, sourced file, or shell function being executed,
whichever was started most recently. Note that in the
case of shell functions the line number refers to the
function as it appeared in the original definition, not
necessarily as displayed by the functions builtin.
LOGNAME
If the corresponding variable is not set in the envi-
ronment of the shell, it is initialized to the login
name corresponding to the current login session. This
parameter is exported by default but this can be dis-
abled using the typeset builtin.
MACHTYPE
The machine type (microprocessor class or machine
model), as determined at compile time.
OLDPWD
The previous working directory. This is set when the
shell initializes and whenever the directory changes.
OPTARG <S>
The value of the last option argument processed by the
getopts command.
OPTIND <S>
The index of the last option argument processed by the
getopts command.
OSTYPE
The operating system, as determined at compile time.
PPID <S>
The process ID of the parent of the shell. As for $$,
the value indicates the parent of the original shell
and does not change in subshells.
zsh 5.0.5 Last change: January 5, 2014 12
User Commands ZSHPARAM(1)
PWD The present working directory. This is set when the
shell initializes and whenever the directory changes.
RANDOM <S>
A pseudo-random integer from 0 to 32767, newly gener-
ated each time this parameter is referenced. The ran-
dom number generator can be seeded by assigning a
numeric value to RANDOM.
The values of RANDOM form an intentionally-repeatable
pseudo-random sequence; subshells that reference RANDOM
will result in identical pseudo-random values unless
the value of RANDOM is referenced or seeded in the par-
ent shell in between subshell invocations.
SECONDS <S>
The number of seconds since shell invocation. If this
parameter is assigned a value, then the value returned
upon reference will be the value that was assigned plus
the number of seconds since the assignment.
Unlike other special parameters, the type of the SEC-
ONDS parameter can be changed using the typeset com-
mand. Only integer and one of the floating point types
are allowed. For example, `typeset -F SECONDS' causes
the value to be reported as a floating point number.
The value is available to microsecond accuracy,
although the shell may show more or fewer digits
depending on the use of typeset. See the documentation
for the builtin typeset in zshbuiltins(1) for more
details.
SHLVL <S>
Incremented by one each time a new shell is started.
signals
An array containing the names of the signals.
TRY_BLOCK_ERROR <S>
In an always block, indicates whether the preceding
list of code caused an error. The value is 1 to indi-
cate an error, 0 otherwise. It may be reset, clearing
the error condition. See Complex Commands in zsh-
misc(1)
TTY The name of the tty associated with the shell, if any.
TTYIDLE <S>
The idle time of the tty associated with the shell in
seconds or -1 if there is no such tty.
UID <S>
zsh 5.0.5 Last change: January 5, 2014 13
User Commands ZSHPARAM(1)
The real user ID of the shell process. If you have
sufficient privileges, you may change the user ID of
the shell by assigning to this parameter. Also (assum-
ing sufficient privileges), you may start a single com-
mand under a different user ID by `(UID=uid; command)'
USERNAME <S>
The username corresponding to the real user ID of the
shell process. If you have sufficient privileges, you
may change the username (and also the user ID and group
ID) of the shell by assigning to this parameter. Also
(assuming sufficient privileges), you may start a sin-
gle command under a different username (and user ID and
group ID) by `(USERNAME=username; command)'
VENDOR
The vendor, as determined at compile time.
zsh_eval_context <S> <Z> (ZSH_EVAL_CONTEXT <S>)
An array (colon-separated list) indicating the context
of shell code that is being run. Each time a piece of
shell code that is stored within the shell is executed
a string is temporarily appended to the array to indi-
cate the type of operation that is being performed.
Read in order the array gives an indication of the
stack of operations being performed with the most imme-
diate context last.
Note that the variable does not give information on
syntactic context such as pipelines or subshells. Use
$ZSH_SUBSHELL to detect subshells.
The context is one of the following:
cmdarg
Code specified by the -c option to the command
line that invoked the shell.
cmdsubst
Command substitution using the `...` or $(...)
construct.
equalsubst
File substitution using the =(...) construct.
eval Code executed by the eval builtin.
evalautofunc
Code executed with the KSH_AUTOLOAD mechanism in
order to define an autoloaded function.
fc Code from the shell history executed by the -e
option to the fc builtin.
zsh 5.0.5 Last change: January 5, 2014 14
User Commands ZSHPARAM(1)
file Lines of code being read directly from a file, for
example by the source builtin.
filecode
Lines of code being read from a .zwc file instead
of directly from the source file.
globqual
Code executed by the e or + glob qualifier.
globsort
Code executed to order files by the o glob quali-
fier.
insubst
File substitution using the <(...) construct.
loadautofunc
Code read directly from a file to define an
autoloaded function.
outsubst
File substitution using the >(...) construct.
sched
Code executed by the sched builtin.
shfunc
A shell function.
stty Code passed to stty by the STTY environment vari-
able. Normally this is passed directly to the
system's stty command, so this value is unlikely
to be seen in practice.
style
Code executed as part of a style retrieved by the
zstyle builtin from the zsh/zutil module.
toplevel
The highest execution level of a script or inter-
active shell.
trap Code executed as a trap defined by the trap
builtin. Traps defined as functions have the con-
text shfunc. As traps are asynchronous they may
have a different hierarchy from other code.
zpty Code executed by the zpty builtin from the
zsh/zpty module.
zregexparse-guard
zsh 5.0.5 Last change: January 5, 2014 15
User Commands ZSHPARAM(1)
Code executed as a guard by the zregexparse com-
mand from the zsh/zutil module.
zregexparse-action
Code executed as an action by the zregexparse com-
mand from the zsh/zutil module.
ZSH_NAME
Expands to the basename of the command used to invoke
this instance of zsh.
ZSH_PATCHLEVEL
The revision string for the version number of the
ChangeLog file in the zsh distribution. This is most
useful in order to keep track of versions of the shell
during development between releases; hence most users
should not use it and should instead rely on $ZSH_VER-
SION.
zsh_scheduled_events
See the section `The zsh/sched Module' in zshmod-
ules(1).
ZSH_SUBSHELL
Readonly integer. Initially zero, incremented each
time the shell forks to create a subshell for executing
code. Hence `(print $ZSH_SUBSHELL)' and `print $(print
$ZSH_SUBSHELL)' output 1, while `( (print $ZSH_SUB-
SHELL) )' outputs 2.
ZSH_VERSION
The version number of the release of zsh.
PARAMETERS USED BY THE SHELL
The following parameters are used by the shell.
In cases where there are two parameters with an upper- and
lowercase form of the same name, such as path and PATH, the
lowercase form is an array and the uppercase form is a
scalar with the elements of the array joined together by
colons. These are similar to tied parameters created via
`typeset -T'. The normal use for the colon-separated form
is for exporting to the environment, while the array form is
easier to manipulate within the shell. Note that unsetting
either of the pair will unset the other; they retain their
special properties when recreated, and recreating one of the
pair will recreate the other.
ARGV0
If exported, its value is used as the argv[0] of exter-
nal commands. Usually used in constructs like
`ARGV0=emacs nethack'.
zsh 5.0.5 Last change: January 5, 2014 16
User Commands ZSHPARAM(1)
BAUD The rate in bits per second at which data reaches the
terminal. The line editor will use this value in order
to compensate for a slow terminal by delaying updates
to the display until necessary. If the parameter is
unset or the value is zero the compensation mechanism
is turned off. The parameter is not set by default.
This parameter may be profitably set in some circum-
stances, e.g. for slow modems dialing into a communi-
cations server, or on a slow wide area network. It
should be set to the baud rate of the slowest part of
the link for best performance.
cdpath <S> <Z> (CDPATH <S>)
An array (colon-separated list) of directories specify-
ing the search path for the cd command.
COLUMNS <S>
The number of columns for this terminal session. Used
for printing select lists and for the line editor.
CORRECT_IGNORE
If set, is treated as a pattern during spelling correc-
tion. Any potential correction that matches the pat-
tern is ignored. For example, if the value is `_*'
then completion functions (which, by convention, have
names beginning with `_') will never be offered as
spelling corrections. The pattern does not apply to
the correction of file names, as applied by the COR-
RECT_ALL option (so with the example just given files
beginning with `_' in the current directory would still
be completed).
DIRSTACKSIZE
The maximum size of the directory stack, by default
there is no limit. If the stack gets larger than this,
it will be truncated automatically. This is useful
with the AUTO_PUSHD option.
ENV If the ENV environment variable is set when zsh is
invoked as sh or ksh, $ENV is sourced after the profile
scripts. The value of ENV is subjected to parameter
expansion, command substitution, and arithmetic expan-
sion before being interpreted as a pathname. Note that
ENV is not used unless zsh is emulating sh or ksh.
FCEDIT
The default editor for the fc builtin. If FCEDIT is
not set, the parameter EDITOR is used; if that is not
set either, a builtin default, usually vi, is used.
fignore <S> <Z> (FIGNORE <S>)
zsh 5.0.5 Last change: January 5, 2014 17
User Commands ZSHPARAM(1)
An array (colon separated list) containing the suffixes
of files to be ignored during filename completion.
However, if completion only generates files with suf-
fixes in this list, then these files are completed any-
way.
fpath <S> <Z> (FPATH <S>)
An array (colon separated list) of directories specify-
ing the search path for function definitions. This
path is searched when a function with the -u attribute
is referenced. If an executable file is found, then it
is read and executed in the current environment.
histchars <S>
Three characters used by the shell's history and lexi-
cal analysis mechanism. The first character signals
the start of a history expansion (default `!'). The
second character signals the start of a quick history
substitution (default `^'). The third character is the
comment character (default `#').
The characters must be in the ASCII character set; any
attempt to set histchars to characters with a
locale-dependent meaning will be rejected with an error
message.
HISTCHARS <S> <Z>
Same as histchars. (Deprecated.)
HISTFILE
The file to save the history in when an interactive
shell exits. If unset, the history is not saved.
HISTORY_IGNORE
If set, is treated as a pattern at the time history
files are written. Any potential history entry that
matches the pattern is skipped. For example, if the
value is `fc *' then commands that invoke the interac-
tive history editor are never written to the history
file (compare the HIST_NO_STORE option or the zshad-
dhistory hook, either of which would prevent such com-
mands from being added to the interactive history at
all).
HISTSIZE <S>
The maximum number of events stored in the internal
history list. If you use the HIST_EXPIRE_DUPS_FIRST
option, setting this value larger than the SAVEHIST
size will give you the difference as a cushion for sav-
ing duplicated history events.
HOME <S>
zsh 5.0.5 Last change: January 5, 2014 18
User Commands ZSHPARAM(1)
The default argument for the cd command. This is not
set automatically by the shell in sh, ksh or csh emula-
tion, but it is typically present in the environment
anyway, and if it becomes set it has its usual special
behaviour.
IFS <S>
Internal field separators (by default space, tab, new-
line and NUL), that are used to separate words which
result from command or parameter expansion and words
read by the read builtin. Any characters from the set
space, tab and newline that appear in the IFS are
called IFS white space. One or more IFS white space
characters or one non-IFS white space character
together with any adjacent IFS white space character
delimit a field. If an IFS white space character
appears twice consecutively in the IFS, this character
is treated as if it were not an IFS white space charac-
ter.
If the parameter is unset, the default is used. Note
this has a different effect from setting the parameter
to an empty string.
KEYBOARD_HACK
This variable defines a character to be removed from
the end of the command line before interpreting it
(interactive shells only). It is intended to fix the
problem with keys placed annoyingly close to return and
replaces the SUNKEYBOARDHACK option which did this for
backquotes only. Should the chosen character be one of
singlequote, doublequote or backquote, there must also
be an odd number of them on the command line for the
last one to be removed.
For backward compabitility, if the SUNKEYBOARDHACK
option is explicitly set, the value of KEYBOARD_HACK
reverts to backquote. If the option is explicitly
unset, this variable is set to empty.
KEYTIMEOUT
The time the shell waits, in hundredths of seconds, for
another key to be pressed when reading bound
multi-character sequences.
LANG <S>
This variable determines the locale category for any
category not specifically selected via a variable
starting with `LC_'.
LC_ALL <S>
This variable overrides the value of the `LANG'
zsh 5.0.5 Last change: January 5, 2014 19
User Commands ZSHPARAM(1)
variable and the value of any of the other variables
starting with `LC_'.
LC_COLLATE <S>
This variable determines the locale category for char-
acter collation information within ranges in glob
brackets and for sorting.
LC_CTYPE <S>
This variable determines the locale category for char-
acter handling functions. If the MULTIBYTE option is
in effect this variable or LANG should contain a value
that reflects the character set in use, even if it is a
single-byte character set, unless only the 7-bit subset
(ASCII) is used. For example, if the character set is
ISO-8859-1, a suitable value might be en_US.iso88591
(certain Linux distributions) or en_US.ISO8859-1
(MacOS).
LC_MESSAGES <S>
This variable determines the language in which messages
should be written. Note that zsh does not use message
catalogs.
LC_NUMERIC <S>
This variable affects the decimal point character and
thousands separator character for the formatted
input/output functions and string conversion functions.
Note that zsh ignores this setting when parsing float-
ing point mathematical expressions.
LC_TIME <S>
This variable determines the locale category for date
and time formatting in prompt escape sequences.
LINES <S>
The number of lines for this terminal session. Used
for printing select lists and for the line editor.
LISTMAX
In the line editor, the number of matches to list with-
out asking first. If the value is negative, the list
will be shown if it spans at most as many lines as
given by the absolute value. If set to zero, the shell
asks only if the top of the listing would scroll off
the screen.
LOGCHECK
The interval in seconds between checks for login/logout
activity using the watch parameter.
MAIL If this parameter is set and mailpath is not set, the
zsh 5.0.5 Last change: January 5, 2014 20
User Commands ZSHPARAM(1)
shell looks for mail in the specified file.
MAILCHECK
The interval in seconds between checks for new mail.
mailpath <S> <Z> (MAILPATH <S>)
An array (colon-separated list) of filenames to check
for new mail. Each filename can be followed by a `?'
and a message that will be printed. The message will
undergo parameter expansion, command substitution and
arithmetic expansion with the variable $_ defined as
the name of the file that has changed. The default
message is `You have new mail'. If an element is a
directory instead of a file the shell will recursively
check every file in every subdirectory of the element.
manpath <S> <Z> (MANPATH <S> <Z>)
An array (colon-separated list) whose value is not used
by the shell. The manpath array can be useful, how-
ever, since setting it also sets MANPATH, and vice
versa.
match
mbegin
mend Arrays set by the shell when the b globbing flag is
used in pattern matches. See the subsection Globbing
flags in the documentation for Filename Generation in
zshexpn(1).
MATCH
MBEGIN
MEND Set by the shell when the m globbing flag is used in
pattern matches. See the subsection Globbing flags in
the documentation for Filename Generation in zsh-
expn(1).
module_path <S> <Z> (MODULE_PATH <S>)
An array (colon-separated list) of directories that
zmodload searches for dynamically loadable modules.
This is initialized to a standard pathname, usually
`/usr/local/lib/zsh/$ZSH_VERSION'. (The
`/usr/local/lib' part varies from installation to
installation.) For security reasons, any value set in
the environment when the shell is started will be
ignored.
These parameters only exist if the installation sup-
ports dynamic module loading.
NULLCMD <S>
The command name to assume if a redirection is speci-
fied with no command. Defaults to cat. For sh/ksh
zsh 5.0.5 Last change: January 5, 2014 21
User Commands ZSHPARAM(1)
behavior, change this to :. For csh-like behavior,
unset this parameter; the shell will print an error
message if null commands are entered.
path <S> <Z> (PATH <S>)
An array (colon-separated list) of directories to
search for commands. When this parameter is set, each
directory is scanned and all files found are put in a
hash table.
POSTEDIT <S>
This string is output whenever the line editor exits.
It usually contains termcap strings to reset the termi-
nal.
PROMPT <S> <Z>
PROMPT2 <S> <Z>
PROMPT3 <S> <Z>
PROMPT4 <S> <Z>
Same as PS1, PS2, PS3 and PS4, respectively.
prompt <S> <Z>
Same as PS1.
PROMPT_EOL_MARK
When the PROMPT_CR and PROMPT_SP options are set, the
PROMPT_EOL_MARK parameter can be used to customize how
the end of partial lines are shown. This parameter
undergoes prompt expansion, with the PROMPT_PERCENT
option set. If not set, the default behavior is equiv-
alent to the value `%B%S%#%s%b'.
PS1 <S>
The primary prompt string, printed before a command is
read. It undergoes a special form of expansion before
being displayed; see EXPANSION OF PROMPT SEQUENCES in
zshmisc(1). The default is `%m%# '.
PS2 <S>
The secondary prompt, printed when the shell needs more
information to complete a command. It is expanded in
the same way as PS1. The default is `%_> ', which dis-
plays any shell constructs or quotation marks which are
currently being processed.
PS3 <S>
Selection prompt used within a select loop. It is
expanded in the same way as PS1. The default is `?# '.
PS4 <S>
The execution trace prompt. Default is `+%N:%i> ',
which displays the name of the current shell structure
zsh 5.0.5 Last change: January 5, 2014 22
User Commands ZSHPARAM(1)
and the line number within it. In sh or ksh emulation,
the default is `+ '.
psvar <S> <Z> (PSVAR <S>)
An array (colon-separated list) whose elements can be
used in PROMPT strings. Setting psvar also sets PSVAR,
and vice versa.
READNULLCMD <S>
The command name to assume if a single input redirect-
ion is specified with no command. Defaults to more.
REPORTTIME
If nonnegative, commands whose combined user and system
execution times (measured in seconds) are greater than
this value have timing statistics printed for them.
Output is suppressed for commands executed within the
line editor, including completion; commands explicitly
marked with the time keyword still cause the summary to
be printed in this case.
REPLY
This parameter is reserved by convention to pass string
values between shell scripts and shell builtins in sit-
uations where a function call or redirection are impos-
sible or undesirable. The read builtin and the select
complex command may set REPLY, and filename generation
both sets and examines its value when evaluating cer-
tain expressions. Some modules also employ REPLY for
similar purposes.
reply
As REPLY, but for array values rather than strings.
RPROMPT <S>
RPS1 <S>
This prompt is displayed on the right-hand side of the
screen when the primary prompt is being displayed on
the left. This does not work if the SINGLE_LINE_ZLE
option is set. It is expanded in the same way as PS1.
RPROMPT2 <S>
RPS2 <S>
This prompt is displayed on the right-hand side of the
screen when the secondary prompt is being displayed on
the left. This does not work if the SINGLE_LINE_ZLE
option is set. It is expanded in the same way as PS2.
SAVEHIST
The maximum number of history events to save in the
history file.
zsh 5.0.5 Last change: January 5, 2014 23
User Commands ZSHPARAM(1)
SPROMPT <S>
The prompt used for spelling correction. The sequence
`%R' expands to the string which presumably needs
spelling correction, and `%r' expands to the proposed
correction. All other prompt escapes are also allowed.
STTY If this parameter is set in a command's environment,
the shell runs the stty command with the value of this
parameter as arguments in order to set up the terminal
before executing the command. The modes apply only to
the command, and are reset when it finishes or is sus-
pended. If the command is suspended and continued later
with the fg or wait builtins it will see the modes
specified by STTY, as if it were not suspended. This
(intentionally) does not apply if the command is con-
tinued via `kill -CONT'. STTY is ignored if the com-
mand is run in the background, or if it is in the envi-
ronment of the shell but not explicitly assigned to in
the input line. This avoids running stty at every
external command by accidentally exporting it. Also
note that STTY should not be used for window size spec-
ifications; these will not be local to the command.
TERM <S>
The type of terminal in use. This is used when looking
up termcap sequences. An assignment to TERM causes zsh
to re-initialize the terminal, even if the value does
not change (e.g., `TERM=$TERM'). It is necessary to
make such an assignment upon any change to the terminal
definition database or terminal type in order for the
new settings to take effect.
TERMINFO <S>
A reference to a compiled description of the terminal,
used by the `terminfo' library when the system has it;
see terminfo(5). If set, this causes the shell to
reinitialise the terminal, making the workaround
`TERM=$TERM' unnecessary.
TIMEFMT
The format of process time reports with the time key-
word. The default is `%J %U user %S system %P cpu %*E
total'. Recognizes the following escape sequences,
although not all may be available on all systems, and
some that are available may not be useful:
%% A `%'.
%U CPU seconds spent in user mode.
%S CPU seconds spent in kernel mode.
%E Elapsed time in seconds.
%P The CPU percentage, computed as (100*%U+%S)/%E.
%W Number of times the process was swapped.
zsh 5.0.5 Last change: January 5, 2014 24
User Commands ZSHPARAM(1)
%X The average amount in (shared) text space used in
kilobytes.
%D The average amount in (unshared) data/stack space
used in kilobytes.
%K The total space used (%X+%D) in kilobytes.
%M The maximum memory the process had in use at any
time in megabytes.
%F The number of major page faults (page needed to be
brought from disk).
%R The number of minor page faults.
%I The number of input operations.
%O The number of output operations.
%r The number of socket messages received.
%s The number of socket messages sent.
%k The number of signals received.
%w Number of voluntary context switches (waits).
%c Number of involuntary context switches.
%J The name of this job.
A star may be inserted between the percent sign and
flags printing time. This cause the time to be printed
in `hh:mm:ss.ttt' format (hours and minutes are only
printed if they are not zero).
TMOUT
If this parameter is nonzero, the shell will receive an
ALRM signal if a command is not entered within the
specified number of seconds after issuing a prompt. If
there is a trap on SIGALRM, it will be executed and a
new alarm is scheduled using the value of the TMOUT
parameter after executing the trap. If no trap is set,
and the idle time of the terminal is not less than the
value of the TMOUT parameter, zsh terminates. Other-
wise a new alarm is scheduled to TMOUT seconds after
the last keypress.
TMPPREFIX
A pathname prefix which the shell will use for all tem-
porary files. Note that this should include an initial
part for the file name as well as any directory names.
The default is `/tmp/zsh'.
watch <S> <Z> (WATCH <S>)
An array (colon-separated list) of login/logout events
to report. If it contains the single word `all', then
all login/logout events are reported. If it contains
the single word `notme', then all events are reported
as with `all' except $USERNAME. An entry in this list
may consist of a username, an `@' followed by a remote
hostname, and a `%' followed by a line (tty). Any or
all of these components may be present in an entry; if
a login/logout event matches all of them, it is
zsh 5.0.5 Last change: January 5, 2014 25
User Commands ZSHPARAM(1)
reported.
WATCHFMT
The format of login/logout reports if the watch parame-
ter is set. Default is `%n has %a %l from %m'. Recog-
nizes the following escape sequences:
%n The name of the user that logged in/out.
%a The observed action, i.e. "logged on" or "logged
off".
%l The line (tty) the user is logged in on.
%M The full hostname of the remote host.
%m The hostname up to the first `.'. If only the IP
address is available or the utmp field contains
the name of an X-windows display, the whole name
is printed.
NOTE: The `%m' and `%M' escapes will work only if
there is a host name field in the utmp on your
machine. Otherwise they are treated as ordinary
strings.
%S (%s)
Start (stop) standout mode.
%U (%u)
Start (stop) underline mode.
%B (%b)
Start (stop) boldface mode.
%t
%@ The time, in 12-hour, am/pm format.
%T The time, in 24-hour format.
%w The date in `day-dd' format.
%W The date in `mm/dd/yy' format.
%D The date in `yy-mm-dd' format.
%(x:true-text:false-text)
Specifies a ternary expression. The character
following the x is arbitrary; the same character
is used to separate the text for the "true" result
from that for the "false" result. Both the sepa-
rator and the right parenthesis may be escaped
zsh 5.0.5 Last change: January 5, 2014 26
User Commands ZSHPARAM(1)
with a backslash. Ternary expressions may be
nested.
The test character x may be any one of `l', `n',
`m' or `M', which indicate a `true' result if the
corresponding escape sequence would return a
non-empty value; or it may be `a', which indicates
a `true' result if the watched user has logged in,
or `false' if he has logged out. Other characters
evaluate to neither true nor false; the entire
expression is omitted in this case.
If the result is `true', then the true-text is
formatted according to the rules above and
printed, and the false-text is skipped. If
`false', the true-text is skipped and the
false-text is formatted and printed. Either or
both of the branches may be empty, but both sepa-
rators must be present in any case.
WORDCHARS <S>
A list of non-alphanumeric characters considered part of a
word by the line editor.
ZBEEP
If set, this gives a string of characters, which can use all
the same codes as the bindkey command as described in the
zsh/zle module entry in zshmodules(1), that will be output
to the terminal instead of beeping. This may have a visible
instead of an audible effect; for example, the string
`\e[?5h\e[?5l' on a vt100 or xterm will have the effect of
flashing reverse video on and off (if you usually use
reverse video, you should use the string `\e[?5l\e[?5h'
instead). This takes precedence over the NOBEEP option.
ZDOTDIR
The directory to search for shell startup files (.zshrc,
etc), if not $HOME.
ZLE_LINE_ABORTED
This parameter is set by the line editor when an error
occurs. It contains the line that was being edited at the
point of the error. `print -zr -- $ZLE_LINE_ABORTED' can be
used to recover the line. Only the most recent line of this
kind is remembered.
ZLE_REMOVE_SUFFIX_CHARS
ZLE_SPACE_SUFFIX_CHARS
These parameters are used by the line editor. In certain
circumstances suffixes (typically space or slash) added by
the completion system will be removed automatically, either
because the next editing command was not an insertable
zsh 5.0.5 Last change: January 5, 2014 27
User Commands ZSHPARAM(1)
character, or because the character was marked as requiring
the suffix to be removed.
These variables can contain the sets of characters that will
cause the suffix to be removed. If ZLE_REMOVE_SUFFIX_CHARS
is set, those characters will cause the suffix to be
removed; if ZLE_SPACE_SUFFIX_CHARS is set, those characters
will cause the suffix to be removed and replaced by a space.
If ZLE_REMOVE_SUFFIX_CHARS is not set, the default behaviour
is equivalent to:
ZLE_REMOVE_SUFFIX_CHARS=$' \t\n;&|'
If ZLE_REMOVE_SUFFIX_CHARS is set but is empty, no charac-
ters have this behaviour. ZLE_SPACE_SUFFIX_CHARS takes
precedence, so that the following:
ZLE_SPACE_SUFFIX_CHARS=$'&|'
causes the characters `&' and `|' to remove the suffix but
to replace it with a space.
To illustrate the difference, suppose that the option
AUTO_REMOVE_SLASH is in effect and the directory DIR has
just been completed, with an appended /, following which the
user types `&'. The default result is `DIR&'. With
ZLE_REMOVE_SUFFIX_CHARS set but without including `&' the
result is `DIR/&'. With ZLE_SPACE_SUFFIX_CHARS set to
include `&' the result is `DIR &'.
Note that certain completions may provide their own suffix
removal or replacement behaviour which overrides the values
described here. See the completion system documentation in
zshcompsys(1).
ZLE_RPROMPT_INDENT <S>
If set, used to give the indentation between the right hand
side of the right prompt in the line editor as given by RPS1
or RPROMPT and the right hand side of the screen. If not
set, the value 1 is used.
Typically this will be used to set the value to 0 so that
the prompt appears flush with the right hand side of the
screen. This is not the default as many terminals do not
handle this correctly, in particular when the prompt appears
at the extreme bottom right of the screen. Recent virtual
terminals are more likely to handle this case correctly.
Some experimentation is necessary.
zsh 5.0.5 Last change: January 5, 2014 28
User Commands ZSHPARAM(1)
ATTRIBUTES
See attributes(5) for descriptions of the following
attributes:
+---------------+------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+------------------+
|Availability | shell/zsh |
+---------------+------------------+
|Stability | Volatile |
+---------------+------------------+
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original
community source was downloaded from http://down-
loads.source-
forge.net/project/zsh/zsh/5.0.5/zsh-5.0.5.tar.bz2
Further information about this software can be found on the
open source community website at http://www.zsh.org/.
zsh 5.0.5 Last change: January 5, 2014 29