Enable PIM

PIM is disabled in the system, by default. Complete the following task to enable PIM.

1. Enable PIM globally in SEFOS 1.

   SEFOS# configure terminal
   SEFOS(config)# set ip pim enable
   SEFOS(config)# end
   

2. View the configuration.

   SEFOS# show ip pim component
    
   PIM Component Information
   ---------------------------
   Component-Id: 1
     PIM Mode: sparse,   PIM Version: 2
     Elected BSR: 0.0.0.0
     Candidate RP Holdtime: 0