Create a PIM Component

This example creates PIM component 2.

1. Create a PIM component.

   SEFOS# configure terminal
   SEFOS(config)# set ip pim enable
   SEFOS(config)# ip pim component 2
   SEFOS(pim-comp)# end
   

2. Ensure that PIM component 2 was created.

   SEFOS# show ip pim component 2
    
   PIM Component Information
   ---------------------------
   Component-Id: 2
     PIM Mode: sparse,   PIM Version: 2
     Elected BSR: 0.0.0.0
     Candidate RP Holdtime: 0