Default Settings
The following table contains the default settings that are
configured for PIM in a SEFOS switch. If the switch is rebooted
for any reason, it returns to the previously saved configuration.
If you have not saved a site configuration, the reboot returns the switch
to the default settings. For instructions on how to save your site
configuration, refer to the software configuration guide for your
switch.
|
|
PIM module status |
Enabled |
PIM SPT group threshold |
0 |
PIM SPT source threshold |
0 |
PIM SPT-switch period |
0 seconds |
PIM RP-threshold |
0 |
PIM RP-switch period |
0 second |
PIM regstop-ratelimit-period |
5 seconds |
PIM PMBR status |
disable |
PIM static-RP |
disable |
PIM component mode |
sparse |
RP-candidate holdtime |
0 second |
PIM query-interval |
30 seconds |
PIM message-interval |
60 seconds |
PIM bsr-candidate |
0 |
PIM component ID |
1 |
PIM hello-hold time |
105 seconds |
PIM DR-priority |
1 |
PIM override-interval |
0 second |
PIM lan-delay |
0 second |
PIM lan-prune-delay |
disable |
|