Battery Service Sequence
Note -
You must completely power off the switch before disconnecting the data cables.
Similarly, you must attach all data cables before powering on the switch.
|
|
|
1.
|
Determine if the battery is faulty.
|
“Determine If the Battery is Faulty” on page 77
|
2.
|
Power off both power supplies.
|
“Power Off a Power Supply” on page 48
Note -
Do not remove the InfiniBand cables until the switch is
powered off.
|
3.
|
Remove all IB cables.
|
“Remove an InfiniBand Cable” on page 70
|
4.
|
Remove the switch from the rack.
|
“Remove the Switch From the Rack” on page 79
|
5.
|
Replace the battery.
|
“Replace the Battery” on page 80
|
6.
|
Install the switch in the rack.
|
Switch Installation,
installing the switch
Note -
Do not power on the switch.
|
7.
|
Install all IB cables.
|
“Install an InfiniBand Cable” on page 74
|
8.
|
Power on both power supplies.
|
“Power On a Power Supply” on page 53
|
9.
|
(Optional) Set the time and date.
|
Switch Administration, setting the date and
time
|
|