Connect the Ethernet Network Cables
The server has four RJ-45 network connectors labeled NET 0, NET 1, NET 2, and
NET 3. Use these ports to connect the server to the network. The Ethernet
interfaces operate at 100 Mbps, 1000 Mbps, and 10000 Mbps. See Rear Panel Components for port locations.
Note -
The Oracle ILOM sideband management feature enables you to access the SP
using one of these Ethernet ports. Refer to the administration guide for
your server for instructions.
Note -
To achieve 1 GbE network speeds, use Category 6 (or better) cables and
network devices that support 1000BASE-T networks.
-
Connect a Category 5 (or better) cable from your network switch or hub to
Ethernet Port 0 (NET 0) on the rear of the chassis.
-
Connect Category 5 (or better) cables from your network switch or hub to
the remaining Ethernet ports (NET 1, NET 2, NET 3) as needed.