Rackmount Kit Overview

Language:

The rackmount kit has two shelf rail assemblies, one for each side of the rack. Each shelf rail is marked LEFT or RIGHT.

The shelf rails are mounted to the rack with four brackets, two on each side. Brackets for square-hole racks are preattached to the shelf rails. The rackmount kit also includes a set of brackets for use with threaded-hole racks.

The shelf rails adjust to fit rack depths from 25 to 34.25 in. (63.5 to 87 cm).

In addition, the rackmount kit includes the shipping brace components. Installing the shipping brace components is optional.

image:Graphic showing components of the rackmount kit.

No.	Description
1	Shelf rails preassembled with adapter brackets (for racks with square mounting holes) (2)
2	Adapter brackets (for racks with round mounting holes) (2)
3	M6 x 16-mm screws (16)
4	Cage nuts (6)
5	10-32 x 10-mm screws (12)
6	Guide pins (2)
7	M6 x 12-mm screws (16)
8	M4 x 10mm flathead screws (4)
9	10-32 shoulder screws (12)

Note - Some of the fastener bags that are included in the kit are not required to install this server.