List of Tables

1-1 Admonishments
2-1 Hex Digit Range Example
2-2 RC Group Weight Example
2-3 RC Group In-Service Threshold States
2-4 In-Service Threshold Example
2-5 Load Shared Group with Weighted GTT Load Sharing Example
2-6 Combined Dominant/Load Shared Group with Weighted GTT Load Sharing Example
2-7 GTT Set Type and GTT Selector Combinations
2-8 Services Supporting Fallback to GTT
2-9 Exceptions to Fallback to GTT
2-10 GTT Hierarchies
2-11 GTT Selector Key
2-12 CdPA GTT Selector Keys
2-13 CgPA GTT Selector Keys
2-14 Messages Generated by the EAGLE GTT Selector Keys
2-15 Search Order for the TCAP Opcode Based Routing Feature Translations with an ANSI Opcode
2-16 Valid and Invalid ACN Values
2-17 Search Order for the TCAP Opcode Based Routing Feature Translations with an ITU Opcode
2-18 Roles and Responsibilities
2-19 GTT Action Events Recorded for Per-TT and System-Wide Measurements Reports
2-20 GTT Action Events Recorded for Per-Path Measurements Reports
2-21 GTT Selector Key for GTI=0
2-22 Searching Order for CdPA GTI=0 GTT Selectors
2-23 Searching Order for CgPA GTI=0 GTT Selectors
2-24 SCCPMSGCNV Parameter Values
2-25 Parameter Values after UDT to XUDT or UDTS to XUDTS Conversion
2-26 Parameter Values after XUDT to UDT or XUDTS to UDTS Conversion
2-27 GTT Set and GTT Selector Advanced GTT Feature Default Parameter Values
2-28 Use of Aliases in GTT Selector Table
2-29 MSU Fields Modified by Global Title Translation
2-30 MSU Fields Modified by Enhanced Global Title Translation
2-31 Service Module and Feature Combinations
2-32 Card Locations
2-33 ELAP-Based and EPAP-Based Features
2-34 SCCP Transactions Per Second
2-35 SCCP Throughput Capacity
2-36 Number Service Module Cards in the System
2-37 Concerned Signaling Point Code Configuration Table
2-38 MAP and MRN Point Code Parameter Combinations
2-39 Maximum Number of True Point Code Entries
2-40 Solitary Mated Application Parameter Combinations
2-41 MAP and MRN Point Code Parameter Combinations
2-42 Maximum Number of True Point Code Entries
2-43 Dominant Mated Application Parameter Combinations for the ENT-MAP Command
2-44 Dominant Mated Application Parameter Combinations for the CHG-MAP Command
2-45 MAP and MRN Point Code Parameter Combinations
2-46 Load Shared Mated Application Parameter Combinations for the ENT-MAP Command
2-47 Load Shared Mated Application Parameter Combinations for the CHG-MAP Command
2-48 MAP and MRN Point Code Parameter Combinations
2-49 Combined Dominant/Load Shared Mated Application Parameter Combinations for the ENT-MAP Command
2-50 Combined Dominant/Load Shared Mated Application Parameter Combinations for the CHG-MAP Command
2-51 Subsystem Features
2-52 Mated Application Parameters
2-53 Mated Application Weight and In-Service Threshold Parameters
2-54 MAP and MRN Point Code Parameter Combinations
2-55 Parameter Combinations for the ENT-MRN Command
2-56 Parameter Combinations for the CHG-MRN Command
2-57 MRN and MAP Point Code Parameter Combinations
2-58 GT Conversion Parameter Combinations
2-59 GT Conversion Parameter Combinations
2-60 Changing a Loopset Parameter Combinations
2-61 SCCP Test Message Parameter Combinations
2-62 NAIV/NAI Mapping
2-63 NPV/NP Mapping
2-64 Add GT Modification Parameter Values
2-65 Change GT Modification Parameter Values
3-1 RTRV-GTTSEL Parameters
3-2 RTRV-GTTSEL GTT Set Name Parameters
3-3 SEAS and Global Title Translation Parameter Conversion
3-4 Feature Status
3-5 Valid Parameter Combinations for the ent-gtt Routing Parameters
3-6 RTRV-GTTSEL Parameters
3-7 Add GTT Parameter Combinations
3-8 SEAS and Global Title Translation Parameter Conversion
3-9 Feature Status
3-10 Valid Parameter Combinations for the chg-gtt Routing Parameters
3-11 RTRV-GTTSEL Parameters
3-12 Change GTT Parameter Combinations
4-1 GTT Set Types
4-2 GTT Set Parameter Combinations - Only the EGTT feature is on
4-3 GTT Set Parameter Combinations - The OBSR Feature is Enabled, the FLOBR or the TOBR Features are Enabled or Turned On
4-4 SETTYPE Feature Requirements
4-5 RTRV-GTTSEL Parameters
4-6 NAIV/NAI Mapping
4-7 NPV/NP Mapping
4-8 Add GTT Selector Parameter Combinations - EGTT Only
4-9 Add GTT Selector Parameter Combinations - Origin-Based SCCP Routing Enabled Only
4-10 Add GTT Selector Parameter Combinations - Flexible Linkset Optional Based Routing Enabled and Turned On Only
4-11 Add GTT Selector Parameter Combinations - OBSR Enabled and FLOBR Enabled and Turned On
4-12 Add GTT Selector Parameter Combinations - FLOBR and TOBR Enabled and Turned On Only
4-13 Add GTT Selector Parameter Combinations - OBSR Enabled, and FLOBR and TOBR Enabled and Turned On
4-14 NAIV/NAI Mapping
4-15 NPV/NP Mapping
4-16 Remove GTT Selector Parameter Combinations - GTI=2 or GTI=4
4-17 Remove GTT Selector Parameter Combinations - GTI=0
4-18 NAIV/NAI Mapping
4-19 NPV/NP Mapping
4-20 Change GTT Selector Parameter Combinations - EGTT Only
4-21 Change GTT Selector Parameter Combinations - Origin-Based SCCP Routing Enabled Only
4-22 Change GTT Selector Parameter Combinations - CDGTTSN and CGGTTSN Columns Shown in the RTRV-GTTSEL Output
4-23 GTTSN and OPTSN Combinations
4-24 GTA Parameter Combinations - No SETTYPE Column in RTRV-GTTSET Output
4-25 GTTSN = CDGTA GTT Set Parameter Combinations
4-26 GTTSN = CGGTA GTT Set Parameter Combinations
4-27 GTTSN = CGPC GTT Set Parameter Combinations
4-28 GTTSN = CGSSN GTT Set Parameter Combinations
4-29 GTTSN = OPC GTT Set Parameter Combinations
4-30 GTTSN = CDSSN GTT Set Parameter Combinations
4-31 GTTSN = OPCODE GTT Set Parameter Combinations
4-32 GTTSN = DPC GTT Set Parameter Combinations
4-33 Optional GTA Parameters
4-34 Feature Requirements for ENT-GTA Parameters
4-35 DLT-GTA Parameter Combinations - EGTT Only
4-36 DLT-GTA Parameter Combinations - GTT Sets CDGTA, CGGTA, CGSSN, CGPC, OPC
4-37 DLT-GTA Parameter Combinations - GTT Sets CDSSN, DPC, and OPCODE
4-38 GTTSN and OPTSN Combinations
4-39 GTA Parameter Combinations - No SETTYPE Column in RTRV-GTTSET Output
4-40 GTTSN = CDGTA GTT Set Parameter Combinations
4-41 GTTSN = CGGTA GTT Set Parameter Combinations
4-42 GTTSN = CGPC GTT Set Parameter Combinations
4-43 GTTSN = CGSSN GTT Set Parameter Combinations
4-44 GTTSN = OPC GTT Set Parameter Combinations
4-45 GTTSN = CDSSN GTT Set Parameter Combinations
4-46 GTTSN = OPCODE GTT Set Parameter Combinations
4-47 GTTSN = DPC GTT Set Parameter Combinations
4-48 Optional GTA Parameters
4-49 Feature Requirements for CHG-GTA Parameters
4-50 Default GTT Mode Option Parameter Combinations
4-51 GTT Actions Parameter Combinations
4-52 GTT Actions Features Part Numbers
5-1 EAGLE Feature and EPAP DB Capacity Combinations
5-2 Reload Times For Cards Connected to EPAP With Cold Restart and 240M DN + 240M IMSI
5-3 EAGLE Feature and EPAPX DB Capacity Combinations
5-4 TOBR Opcode Quantity Part Numbers
5-5 GTT Actions Features Part Numbers
A-1 NAIV/NAI Mapping
A-2 NPV/NP Mapping
A-3 Parameter Combinations for Adding Service Selectors for the MO SMS B-Party Routing Feature
A-4 NAIV/NAI Mapping
A-5 NPV/NP Mapping
A-6 Parameter Combinations for Removing Service Selectors
A-7 NAIV/NAI Mapping
A-8 NPV/NP Mapping
A-9 Parameter Combinations for Changing Service Selectors for the MO SMS B-Party Routing Feature
B-1 CHG-PPSOPTS Parameter Combinations