Go to main content

SPARC S7-2 Server Service Manual

Exit Print View

Updated: March 2017
 
 

Install a Drive Filler


Caution

Caution  -  When you remove a drive or filler, replace it with a filler or another drive. Otherwise, the server might overheat due to improper airflow.


This is a hot-service procedure that can be performed by a customer while the server is running.

  1. Fully open the release lever on the drive filler.
  2. Install the drive.
    1. Slide the drive filler into the drive slot until it is fully seated.
    2. Close the latch to lock the filler in place.

Related Information