Oracle Hardware Management Pack Utilities
The following table lists and describes the Oracle Hardware Management Pack
utilities. The utilities work with most supported operating systems. Additionally,
utility commands can be scripted to support multiple servers, as long as the servers
are of the same type.
Note -
Oracle Hardware Management Pack includes components that are not included in
this guide. Refer to the Oracle Hardware Management Pack documentation for more
comprehensive information.
|
|
ubiosconfig
|
Preserve BIOS settings and some service processor
settings.
|
fwupdate
|
Update Oracle ILOM and BIOS; or query, update, and validate
firmware versions on supported SAS storage devices, embedded SAS
storage controllers, SAS storage expanders, storage drives,
InfiniBand controllers, and Fibre Channel controllers.
|
raidconfig
|
View or create RAID volumes on storage drives that are
attached to RAID controllers.
|
ilomconfig
|
Restore, set, and view Oracle ILOM settings, such as network
management, clock configuration, and user management
settings.
|
hwtmgmtcli
|
Monitor system health.
|
ipmitool
|
After loading the requisite driver, use Oracle Hardware
Management Pack to read sensor data repository (SDR) data and
display other information about the server. You can also get and
set LAN configuration parameters and perform chassis power
control operations.
|
nvmeadm
|
Manage NVM Express (NVMe) devices. This includes viewing
information about and updating NVMe controller and flash device
configuration.
|
itpconfig
|
Configure Oracle ILOM to forward SNMP traps to the host or a
configurable destination.
|
|