Oracle^® X7 Series Servers Administration Guide

Set SP Host Power Policy at Boot

Before You Begin

Before you perform the following procedure, ensure that you have Admin (a) role privileges in Oracle ILOM.

1. To set a power-on policy in the Oracle ILOM web interface, perform the following steps:
   1. Log in to the Oracle ILOM web interface.

      For instructions, see Accessing Oracle ILOM.

   2. In the navigation pane, click System Management → Policy.
   3. In the Service Processor Policies table, select one of the following policies:
      • Auto power-on host on boot
      • Set host power to last power state on boot

      The power on policies are mutually exclusive, that is, only one can be enabled at a time. For more information about each policy, click the More Details link at the top of the page.

   4. In the Actions drop-down list, select Enable.
2. To set a power-on policy in the Oracle ILOM command-line interface (CLI), perform the following steps:
   1. Log in to the Oracle ILOM CLI.

      For instructions, see Accessing Oracle ILOM.

   2. Use one of the following commands:
      • set /SP/policy HOST_AUTO_POWER_ON=enabled
      • set /SP/policy HOST_LAST_POWER_STATE=enabled

      The power-on policies are mutually exclusive, that is, only one can be enabled at a time.

Related Information

• Power-On and Cooling-Down Policies Configurable from the Server SP, Oracle ILOM Administrator's Guide for Configuration and Maintenance, Firmware Release 4.0.x