S

safety informationSafety Information

sas2ircu utilitysas2ircu Utility

SCCServicing the ID PROM

select commandPrepare to Create a RAID Hardware Volume (FCode-based RAID Utility)

serial cable pin assignmentsPower On the Host Through the CMM SER MGT Port (CLI)

serial number

Transfer Components to the New Enclosure Assembly

Find the Server Module Serial Number

serial port connection

Dongle Cables

Plan Communication With the Server Module During Installation

serial redirectionPower On the Host Through the CMM (Web Interface)

server

accessingAccessing the Server

changing identifierChange Server Identifier Information

controlling

Booting and Shutting Down the OS

Controlling the Server

resetting

from Oracle ILOMReset the Server (Oracle ILOM)

from Oracle SolarisReset the Server (Oracle Solaris)

server modulePower On the Host (Power Button)

configuring the OSConfigure the Preinstalled OS

featuresServer Module Overview

host

Power On the Host (Power Button)

Power On the Host (Oracle ILOM)

inserting into chassisInsert the Server Module Into the Chassis

installing

Install the Server Module Into the Modular System

Installing the Server Module

powering on

Power On the Host (Oracle ILOM)

Powering On the Server Module for the First Time

startingPower On the Host Through the CMM SER MGT Port (CLI)

understandingUnderstanding the Server Module

Service Required LEDFront Panel Controls and LEDs

set commandAssign a Static IP Address to the SP

shipping kit inventoryShipping Kit

show faulty commandOracle ILOM Service-Related Commands

show faulty commandVerify a DIMM

show-volumes commandDisplay Status (FCode-Based RAID Utility)

show commandAssign a Static IP Address to the SP

shutdown commandShut Down the OS and Host (Commands)

shutting down Oracle Solaris

init commandShut Down the OS (init Command)

shutdown commandShut Down the OS (shutdown Command)

sideband connection

Configure SP In-band (Sideband) Access

Oracle ILOM In-band (Sideband) Management

Connecting to the SP (In-band)

slot assignments, DIMM

DIMM LEDs

DIMM FRU Names

SP

installingInstall the SP Card

network accessDisable or Reenable Network Access to the SP

network address

SP Network Address Options

Configuring SP and Host Network Addresses

removingRemove the SP Card

reset valuesReset the Values in the SP to Default Values

resetting

Reset the SP

Resetting the Server and SP

servicingServicing the SP Card

specifications

acousticEnvironmental Specifications

electricalElectrical Specifications

elevationEnvironmental Specifications

environmentalEnvironmental Specifications

humidityEnvironmental Specifications

physicalPhysical Specifications

powerElectrical Specifications

temperatureEnvironmental Specifications

voltageElectrical Specifications

ssh commandPower On the Host Through the CMM (CLI)

standby mode

Set the Server Module to a Ready-to-Remove State

Shut Down the OS and Host (Power Button – Graceful)

start command

Power On the Host Through the CMM SER MGT Port (CLI)

Power On the Host Through the CMM (CLI)

starting the server modulePower On the Host Through the CMM SER MGT Port (CLI)

static IP addressAssign a Static IP Address to the SP

system administration overviewUnderstanding System Administration Resources

system communicationAccessing the Server

system console, logging inLog In to the System Console

system controls, front panelFront Panel Controls and LEDs

system firmwareServer Module Overview

System Locator LEDFront Panel Controls and LEDs

System Overtemp LEDFront Panel Controls and LEDs