phys-schost# refleja un indicador de cluster global. Siga este procedimiento en un cluster global.
Este procedimiento proporciona las formas largas de los comandos de Oracle Solaris Cluster. La mayoría de los comandos también tienen una forma corta. A excepción de las formas de los nombres de comandos, los comandos son idénticos.
También puede ver la configuración de un cluster mediante la GUI de Oracle Solaris Cluster Manager. Para obtener instrucciones de inicio de sesión en la GUI, consulte Cómo obtener acceso a Oracle Solaris Cluster Manager.
Antes de empezar
Los usuarios que no tienen el rol root necesitan la autorización de RBAC solaris.cluster.read para utilizar el subcomando status.
% cluster show
Siga todos los pasos de este procedimiento desde un nodo del cluster global.
Al ejecutar el comando cluster show desde un nodo del cluster global, se muestra información detallada sobre la configuración del cluster e información sobre los clusters de zona si es que están configurados.
También puede usar el comando clzonecluster show para visualizar la información de configuración solo de los clusters de zona. Entre las propiedades de un cluster de zona están el nombre, el tipo de IP, el arranque automático y la ruta de zona. El subcomando show se ejecuta dentro de un cluster de zona y se aplica solo a ese cluster de zona. Al ejecutar el comando clzonecluster show desde un nodo del cluster de zona, solo se recupera el estado de los objetos visibles en ese cluster de zona en concreto.
Para visualizar más información acerca del comando cluster, utilice las opciones para obtener más detalles. Consulte la página del comando man cluster(1CL) para obtener detalles. Consulte la página del comando man clzonecluster(1CL) para obtener más información sobre clzonecluster.
En el ejemplo siguiente figura información de configuración sobre el cluster global. Si tiene configurado un cluster de zona, también se enumera la pertinente información.
phys-schost# cluster show
=== Cluster ===
Cluster Name: cluster-1
clusterid: 0x4DA2C888
installmode: disabled
heartbeat_timeout: 10000
heartbeat_quantum: 1000
private_netaddr: 172.11.0.0
private_netmask: 255.255.248.0
max_nodes: 64
max_privatenets: 10
num_zoneclusters: 12
udp_session_timeout: 480
concentrate_load: False
global_fencing: prefer3
Node List: phys-schost-1
Node Zones: phys_schost-2:za
=== Host Access Control ===
Cluster name: clustser-1
Allowed hosts: phys-schost-1, phys-schost-2:za
Authentication Protocol: sys
=== Cluster Nodes ===
Node Name: phys-schost-1
Node ID: 1
Enabled: yes
privatehostname: clusternode1-priv
reboot_on_path_failure: disabled
globalzoneshares: 3
defaultpsetmin: 1
quorum_vote: 1
quorum_defaultvote: 1
quorum_resv_key: 0x43CB1E1800000001
Transport Adapter List: net1, net3
--- Transport Adapters for phys-schost-1 ---
Transport Adapter: net1
Adapter State: Enabled
Adapter Transport Type: dlpi
Adapter Property(device_name): net
Adapter Property(device_instance): 1
Adapter Property(lazy_free): 1
Adapter Property(dlpi_heartbeat_timeout): 10000
Adapter Property(dlpi_heartbeat_quantum): 1000
Adapter Property(nw_bandwidth): 80
Adapter Property(bandwidth): 10
Adapter Property(ip_address): 172.16.1.1
Adapter Property(netmask): 255.255.255.128
Adapter Port Names: 0
Adapter Port State(0): Enabled
Transport Adapter: net3
Adapter State: Enabled
Adapter Transport Type: dlpi
Adapter Property(device_name): net
Adapter Property(device_instance): 3
Adapter Property(lazy_free): 0
Adapter Property(dlpi_heartbeat_timeout): 10000
Adapter Property(dlpi_heartbeat_quantum): 1000
Adapter Property(nw_bandwidth): 80
Adapter Property(bandwidth): 10
Adapter Property(ip_address): 172.16.0.129
Adapter Property(netmask): 255.255.255.128
Adapter Port Names: 0
Adapter Port State(0): Enabled
--- SNMP MIB Configuration on phys-schost-1 ---
SNMP MIB Name: Event
State: Disabled
Protocol: SNMPv2
--- SNMP Host Configuration on phys-schost-1 ---
--- SNMP User Configuration on phys-schost-1 ---
SNMP User Name: foo
Authentication Protocol: MD5
Default User: No
Node Name: phys-schost-2:za
Node ID: 2
Type: cluster
Enabled: yes
privatehostname: clusternode2-priv
reboot_on_path_failure: disabled
globalzoneshares: 1
defaultpsetmin: 2
quorum_vote: 1
quorum_defaultvote: 1
quorum_resv_key: 0x43CB1E1800000002
Transport Adapter List: e1000g1, nge1
--- Transport Adapters for phys-schost-2 ---
Transport Adapter: e1000g1
Adapter State: Enabled
Adapter Transport Type: dlpi
Adapter Property(device_name): e1000g
Adapter Property(device_instance): 2
Adapter Property(lazy_free): 0
Adapter Property(dlpi_heartbeat_timeout): 10000
Adapter Property(dlpi_heartbeat_quantum): 1000
Adapter Property(nw_bandwidth): 80
Adapter Property(bandwidth): 10
Adapter Property(ip_address): 172.16.0.130
Adapter Property(netmask): 255.255.255.128
Adapter Port Names: 0
Adapter Port State(0): Enabled
Transport Adapter: nge1
Adapter State: Enabled
Adapter Transport Type: dlpi
Adapter Property(device_name): nge
Adapter Property(device_instance): 3
Adapter Property(lazy_free): 1
Adapter Property(dlpi_heartbeat_timeout): 10000
Adapter Property(dlpi_heartbeat_quantum): 1000
Adapter Property(nw_bandwidth): 80
Adapter Property(bandwidth): 10
Adapter Property(ip_address): 172.16.1.2
Adapter Property(netmask): 255.255.255.128
Adapter Port Names: 0
Adapter Port State(0): Enabled
--- SNMP MIB Configuration on phys-schost-2 ---
SNMP MIB Name: Event
State: Disabled
Protocol: SNMPv2
--- SNMP Host Configuration on phys-schost-2 ---
--- SNMP User Configuration on phys-schost-2 ---
=== Transport Cables ===
Transport Cable: phys-schost-1:e1000g1,switch2@1
Cable Endpoint1: phys-schost-1:e1000g1
Cable Endpoint2: switch2@1
Cable State: Enabled
Transport Cable: phys-schost-1:nge1,switch1@1
Cable Endpoint1: phys-schost-1:nge1
Cable Endpoint2: switch1@1
Cable State: Enabled
Transport Cable: phys-schost-2:nge1,switch1@2
Cable Endpoint1: phys-schost-2:nge1
Cable Endpoint2: switch1@2
Cable State: Enabled
Transport Cable: phys-schost-2:e1000g1,switch2@2
Cable Endpoint1: phys-schost-2:e1000g1
Cable Endpoint2: switch2@2
Cable State: Enabled
=== Transport Switches ===
Transport Switch: switch2
Switch State: Enabled
Switch Type: switch
Switch Port Names: 1 2
Switch Port State(1): Enabled
Switch Port State(2): Enabled
Transport Switch: switch1
Switch State: Enabled
Switch Type: switch
Switch Port Names: 1 2
Switch Port State(1): Enabled
Switch Port State(2): Enabled
=== Quorum Devices ===
Quorum Device Name: d3
Enabled: yes
Votes: 1
Global Name: /dev/did/rdsk/d3s2
Type: shared_disk
Access Mode: scsi3
Hosts (enabled): phys-schost-1, phys-schost-2
Quorum Device Name: qs1
Enabled: yes
Votes: 1
Global Name: qs1
Type: quorum_server
Hosts (enabled): phys-schost-1, phys-schost-2
Quorum Server Host: 10.11.114.83
Port: 9000
=== Device Groups ===
Device Group Name: testdg3
Type: SVM
failback: no
Node List: phys-schost-1, phys-schost-2
preferenced: yes
numsecondaries: 1
diskset name: testdg3
=== Registered Resource Types ===
Resource Type: SUNW.LogicalHostname:2
RT_description: Logical Hostname Resource Type
RT_version: 4
API_version: 2
RT_basedir: /usr/cluster/lib/rgm/rt/hafoip
Single_instance: False
Proxy: False
Init_nodes: All potential masters
Installed_nodes: <All>
Failover: True
Pkglist: <NULL>
RT_system: True
Global_zone: True
Resource Type: SUNW.SharedAddress:2
RT_description: HA Shared Address Resource Type
RT_version: 2
API_version: 2
RT_basedir: /usr/cluster/lib/rgm/rt/hascip
Single_instance: False
Proxy: False
Init_nodes: <Unknown>
Installed_nodes: <All>
Failover: True
Pkglist: <NULL>
RT_system: True
Global_zone: True
Resource Type: SUNW.HAStoragePlus:4
RT_description: HA Storage Plus
RT_version: 4
API_version: 2
RT_basedir: /usr/cluster/lib/rgm/rt/hastorageplus
Single_instance: False
Proxy: False
Init_nodes: All potential masters
Installed_nodes: <All>
Failover: False
Pkglist: <NULL>
RT_system: True
Global_zone: True
Resource Type: SUNW.haderby
RT_description: haderby server for Oracle Solaris Cluster
RT_version: 1
API_version: 7
RT_basedir: /usr/cluster/lib/rgm/rt/haderby
Single_instance: False
Proxy: False
Init_nodes: All potential masters
Installed_nodes: <All>
Failover: False
Pkglist: <NULL>
RT_system: True
Global_zone: True
Resource Type: SUNW.sctelemetry
RT_description: sctelemetry service for Oracle Solaris Cluster
RT_version: 1
API_version: 7
RT_basedir: /usr/cluster/lib/rgm/rt/sctelemetry
Single_instance: True
Proxy: False
Init_nodes: All potential masters
Installed_nodes: <All>
Failover: False
Pkglist: <NULL>
RT_system: True
Global_zone: True
=== Resource Groups and Resources ===
Resource Group: HA_RG
RG_description: <Null>
RG_mode: Failover
RG_state: Managed
Failback: False
Nodelist: phys-schost-1 phys-schost-2
--- Resources for Group HA_RG ---
Resource: HA_R
Type: SUNW.HAStoragePlus:4
Type_version: 4
Group: HA_RG
R_description:
Resource_project_name: SCSLM_HA_RG
Enabled{phys-schost-1}: True
Enabled{phys-schost-2}: True
Monitored{phys-schost-1}: True
Monitored{phys-schost-2}: True
Resource Group: cl-db-rg
RG_description: <Null>
RG_mode: Failover
RG_state: Managed
Failback: False
Nodelist: phys-schost-1 phys-schost-2
--- Resources for Group cl-db-rg ---
Resource: cl-db-rs
Type: SUNW.haderby
Type_version: 1
Group: cl-db-rg
R_description:
Resource_project_name: default
Enabled{phys-schost-1}: True
Enabled{phys-schost-2}: True
Monitored{phys-schost-1}: True
Monitored{phys-schost-2}: True
Resource Group: cl-tlmtry-rg
RG_description: <Null>
RG_mode: Scalable
RG_state: Managed
Failback: False
Nodelist: phys-schost-1 phys-schost-2
--- Resources for Group cl-tlmtry-rg ---
Resource: cl-tlmtry-rs
Type: SUNW.sctelemetry
Type_version: 1
Group: cl-tlmtry-rg
R_description:
Resource_project_name: default
Enabled{phys-schost-1}: True
Enabled{phys-schost-2}: True
Monitored{phys-schost-1}: True
Monitored{phys-schost-2}: True
=== DID Device Instances ===
DID Device Name: /dev/did/rdsk/d1
Full Device Path: phys-schost-1:/dev/rdsk/c0t2d0
Replication: none
default_fencing: global
DID Device Name: /dev/did/rdsk/d2
Full Device Path: phys-schost-1:/dev/rdsk/c1t0d0
Replication: none
default_fencing: global
DID Device Name: /dev/did/rdsk/d3
Full Device Path: phys-schost-2:/dev/rdsk/c2t1d0
Full Device Path: phys-schost-1:/dev/rdsk/c2t1d0
Replication: none
default_fencing: global
DID Device Name: /dev/did/rdsk/d4
Full Device Path: phys-schost-2:/dev/rdsk/c2t2d0
Full Device Path: phys-schost-1:/dev/rdsk/c2t2d0
Replication: none
default_fencing: global
DID Device Name: /dev/did/rdsk/d5
Full Device Path: phys-schost-2:/dev/rdsk/c0t2d0
Replication: none
default_fencing: global
DID Device Name: /dev/did/rdsk/d6
Full Device Path: phys-schost-2:/dev/rdsk/c1t0d0
Replication: none
default_fencing: global
=== NAS Devices ===
Nas Device: nas_filer1
Type: sun_uss
nodeIPs{phys-schost-2}: 10.134.112.112
nodeIPs{phys-schost-1 10.134.112.113
User ID: root
Ejemplo 1-6 Visualización de la información del cluster de zona
El siguiente ejemplo lista las propiedades de la configuración del cluster de zona con RAC.
% clzonecluster show === Zone Clusters === Zone Cluster Name: sczone zonename: sczone zonepath: /zones/sczone autoboot: TRUE ip-type: shared enable_priv_net: TRUE --- Solaris Resources for sczone --- Resource Name: net address: 172.16.0.1 physical: auto Resource Name: net address: 172.16.0.2 physical: auto Resource Name: fs dir: /local/ufs-1 special: /dev/md/ds1/dsk/d0 raw: /dev/md/ds1/rdsk/d0 type: ufs options: [logging] Resource Name: fs dir: /gz/db_qfs/CrsHome special: CrsHome raw: type: samfs options: [] Resource Name: fs dir: /gz/db_qfs/CrsData special: CrsData raw: type: samfs options: [] Resource Name: fs dir: /gz/db_qfs/OraHome special: OraHome raw: type: samfs options: [] Resource Name: fs dir: /gz/db_qfs/OraData special: OraData raw: type: samfs options: [] --- Zone Cluster Nodes for sczone --- Node Name: sczone-1 physical-host: sczone-1 hostname: lzzone-1 Node Name: sczone-2 physical-host: sczone-2 hostname: lzzone-2
También puede ver los dispositivos NAS configurados para clusters globales o de zona mediante el subcomando clnasdevice show o Oracle Solaris Cluster Manager. Para obtener más información, consulte la página del comando man clnasdevice(1CL).