Oracle^® Server X5-8 Service Manual

Remove a Storage Drive

Access this component directly from the rear of the server.

Before You Begin

• For component information, see About System Components.

• For storage drive information, see Storage Drive Reference.

1. Prepare the server for hot service. See Prepare the Server for Hot Service.

   Alternatively, to prepare the server for cold service, see Prepare the Server for Cold Service.

2. Identify the storage drive by its position, designation, and the indicators on its front panel.

   For example, look for the blue steady on Ready to Remove indicator or the amber steady on Service Action Required indicator.

3. To unlock the storage drive handle, press the handle release button on the front of the HDD.

   The spring-loaded handle pops open.

   
   
4. To remove the HDD, rotate the handle to its fully-open position and pull the HDD out of its slot.
   

   Rotating the handle to its fully-open position disengages the drive from its internal connector.

5. If you are not replacing the HDD, install an HDD filler panel.

See Also

• Returning the Server to Operation.