Removing the 7x20 Mounting Brackets from inside the Slide Rails
Use this procedure to remove the 7x20 mounting brackets from inside the slide
rails. If the mounting brackets were not shipped inside the slide rails, move on to
Installing the Mounting Brackets on a 7x20.
-
Unpack the slide rails and locate the slide rail lock at the front of the assembly.
-
Squeeze and hold the tabs at top and bottom of the lock (1) while you pull the mounting bracket out to the stop.
-
Push the mounting bracket release button toward the front of the mounting bracket (2) while withdrawing the bracket from the assembly.
Example 1 Disassembling a 7120/7320 Rail Kit
The following graphic illustrates the procedure for disassembling the 7120/7320
rail kit.
Example 2 Disassembling a 7420 Rail Kit
The following graphic illustrates the procedure for disassembling the 7420 rail
kit.