|Skip Navigation Links|
|Exit Print View|
|Sun Network QDR InfiniBand Gateway Switch HTML Document Collection for Firmware Version 2.0|
Displays environmental status.
This hardware command performs a series of hardware and environmental tests of the gateway. This command is an amalgamation of these commands:
The command output provides voltage and temperature values, pass-fail results, and error messages.
The env_test command is available from the /SYS/Switch_Diag, /SYS/Gateway_Mgmt, and /SYS/Fabric_Mgmt Linux shell targets of the Oracle ILOM CLI interface.
This example shows how to display the hardware and environmental status of the gateway with the env_test command.
# env_test Environment test started: Starting Voltage test: Voltage ECB OK Measured 3.3V Main = 3.28 V Measured 3.3V Standby = 3.37 V Measured 12V = 12.06 V Measured 5V = 5.03 V Measured VBAT = 3.25 V Measured 1.0V = 1.01 V Measured I4 1.2V = 1.22 V Measured 2.5V = 2.51 V Measured V1P2 DIG = 1.18 V Measured V1P2 ANG = 1.18 V Measured 1.2V BridgeX = 1.22 V Measured 1.8V = 1.80 V Measured 1.2V Standby = 1.20 V Voltage test returned OK Starting PSU test: PSU 0 present PSU 1 present PSU test returned OK Starting Temperature test: Back temperature 30.5 Front temperature 30.6 SP temperature 34.1 Switch temperature 48, maxtemperature 49 Bridge-0 temperature 40, maxtemperature 41 Bridge-1 temperature 45, maxtemperature 45 Temperature test returned OK Starting FAN test: Fan 0 not present Fan 1 running at rpm 12075 Fan 2 running at rpm 11960 Fan 3 running at rpm 12075 Fan 4 not present FAN test returned OK Starting Connector test: Connector test returned OK Starting Onboard ibdevice test: Switch OK Bridge-0 OK Bridge-1 OK All Internal ibdevices OK Onboard ibdevice test returned OK Environment test PASSED #