|Skip Navigation Links|
|Exit Print View|
|Sun Network QDR InfiniBand Gateway Switch HTML Document Collection for Firmware Version 2.0|
This hardware command displays the internal voltages for the main board. On the left side of the equals sign is the expected voltage. On the right side of the equals sign is the measured voltage. If the difference between the expected voltage and the measured voltage is more than 10%, the cause should be investigated. The command also provides a summary of the voltage conditions.
The checkvoltages command is available from the /SYS/Switch_Diag, /SYS/Gateway_Mgmt, and /SYS/Fabric_Mgmt Linux shell targets of the Oracle ILOM CLI interface.
This example shows how to check that voltages are at nominal values with the checkvoltages command.
# checkvoltages Voltage ECB OK Measured 3.3V Main = 3.30 V Measured 3.3V Standby = 3.42 V Measured 12V = 12.06 V Measured 5V = 5.03 V Measured VBAT = 3.17 V Measured 1.0V = 1.01 V Measured I4 1.2V = 1.22 V Measured 2.5V = 2.51 V Measured V1P2 DIG = 1.18 V Measured V1P2 ANG = 1.18 V Measured 1.2V BridgeX = 1.22 V Measured 1.8V = 1.80 V Measured 1.2V Standby = 1.20 V All voltages OK #