Oracle^® Server X5-2 Service Manual

Install an Internal USB Flash Drive

1. Unpack the replacement USB flash drive.
2. Insert the USB flash drive into the internal USB port.

   ---

   Note -  If you are replacing the Oracle System Assistant USB flash drive, insert the USB flash drive into the bottom USB slot.

   ---

3. Return the server to operation.
   1. Install the server top cover.

      See Install the Server Top Cover.

   2. Close the fan door.
   3. Return the server to the normal rack position.

      See Return the Server to the Normal Rack Position.

   4. Reconnect the power cords to the server power supplies and reconnect the data cables.

      See Reconnect Data Cables and Power Cords.

   5. Power on the server.

      See Power On the Server.

      Verify that the Power/OK status indicator is steady on.

4. If the USB flash drive that you replaced was the Oracle System Assistant USB flash drive, you need to reinstall Oracle System Assistant on the new USB flash drive. For instructions, see the procedures for restoring Oracle System Assistant in the Oracle X5 Series Servers Administration Guide at https://www.oracle.com/goto/x86admindiag/docs.