Go to main content

Oracle® Server X5-2 Service Manual

Exit Print View

Updated: January 2021
 
 

Product Description

The Oracle Server X5-2 is an enterprise-class, one rack unit (1U) server. It supports the following components:

  • Up to two Intel processors. Processors with the following capabilities are supported:

    • 2.3 GHz, 18-core, 145W

    • 2.6 GHz, 12-core, 130W

    • 2.6 GHz, 10-core, 105W

    • 2.4 GHz, 8-core, 85W

  • Up to 12 DIMMs per processor for a maximum of 24 DDR4 DIMMs and a maximum of 768 GB of memory in dual-processor systems. DIMM sizes of 8 GB, 16 GB, and 32 GB are supported.


    Note -  A maximum of 12 DIMMs for a maximum of 384 GB are supported in single-processor systems.
  • Four PCIe Gen3 slots in dual-processor systems: one slot, slot 4, is dedicated to the internal HBA. PCIe slot 1 is nonfunctional in single-processor systems.

  • Four Ethernet ports (NET0, NET1, NET2, and NET3 located on the rear of the server) are supported on dual-processor systems.


    Note -  Ethernet ports NET2 and NET3 are nonfunctional on single-processor systems.
  • Storage drive configurations include a DVD drive (optional) and up to eight hard disk drives (HDDs) or solid state drives (SSDs), with optional support for up to four PCIe-based NVMe (non-volatile memory express) SSD drives.

  • Two hot-pluggable, redundant power supplies.

  • An on-board Oracle Integrated Lights Out Manager (Oracle ILOM) service processor (SP) based on the Emulex Pilot3 chip.

  • (Optional) The Oracle System Assistant server setup tool, which is embedded on a preinstalled USB flash drive.