JavaScript is required to for searching.
Skip Navigation Links
Exit Print View
man pages section 1M: System Administration Commands     Oracle Solaris 11 Express 11/10
search filter icon
search icon

Document Information

Preface

Introduction

System Administration Commands - Part 1

System Administration Commands - Part 2

makedbm(1M)

makemap(1M)

makeuuid(1M)

masfcnv(1M)

mdlogd(1M)

mdmonitord(1M)

mdnsd(1M)

medstat(1M)

metaclear(1M)

metadb(1M)

metadetach(1M)

metadevadm(1M)

metahs(1M)

metaimport(1M)

metainit(1M)

metaoffline(1M)

metaonline(1M)

metaparam(1M)

metarecover(1M)

metarename(1M)

metareplace(1M)

metaroot(1M)

metaset(1M)

metassist(1M)

metastat(1M)

metasync(1M)

metattach(1M)

mib2mof(1M)

mibiisa(1M)

mkbootmedia(1M)

mkdevalloc(1M)

mkdevmaps(1M)

mkfifo(1M)

mkfile(1M)

mkfs(1M)

mkfs_pcfs(1M)

mkfs_udfs(1M)

mkfs_ufs(1M)

mknod(1M)

mkntfs(1M)

mkpwdict(1M)

modinfo(1M)

modload(1M)

modunload(1M)

mofcomp(1M)

mofreg(1M)

monacct(1M)

monitor(1M)

mount(1M)

mountall(1M)

mount_cachefs(1M)

mountd(1M)

mount_hsfs(1M)

mount_nfs(1M)

mount_pcfs(1M)

mount_smbfs(1M)

mount_tmpfs(1M)

mount_udfs(1M)

mount_ufs(1M)

mpathadm(1M)

mpstat(1M)

msgid(1M)

mvdir(1M)

named(1M)

named-checkconf(1M)

named-checkzone(1M)

named-compilezone(1M)

ncaconfd(1M)

ncheck(1M)

ncheck_ufs(1M)

ndd(1M)

ndmpadm(1M)

ndmpd(1M)

ndmpstat(1M)

netcfgd(1M)

netservices(1M)

netstat(1M)

netstrategy(1M)

newaliases(1M)

newfs(1M)

newkey(1M)

nfs4cbd(1M)

nfsd(1M)

nfslogd(1M)

nfsmapid(1M)

nfsref(1M)

nfsstat(1M)

nlsadmin(1M)

nscadm(1M)

nscd(1M)

nslookup(1M)

nsupdate(1M)

ntfscat(1M)

ntfsclone(1M)

ntfscluster(1M)

ntfscmp(1M)

ntfscp(1M)

ntfsfix(1M)

ntfsinfo(1M)

ntfslabel(1M)

ntfsls(1M)

ntfsprogs(1M)

ntfsresize(1M)

ntfsundelete(1M)

nulladm(1M)

nwamadm(1M)

nwamcfg(1M)

nwamd(1M)

obpsym(1M)

oplhpd(1M)

parse_dynamic_clustertoc(1M)

parted(1M)

pbind(1M)

pcitool(1M)

pfinstall(1M)

pginfo(1M)

pgstat(1M)

pgxconfig(1M)

picld(1M)

ping(1M)

pkg2du(1M)

pkgadd(1M)

pkgadm(1M)

pkgask(1M)

pkgchk(1M)

pkgcond(1M)

pkgrm(1M)

plockstat(1M)

pmadm(1M)

pmconfig(1M)

pntadm(1M)

polkit-is-privileged(1M)

pooladm(1M)

poolbind(1M)

poolcfg(1M)

poold(1M)

poolstat(1M)

ports(1M)

powerd(1M)

poweroff(1M)

powertop(1M)

ppdmgr(1M)

pppd(1M)

pppoec(1M)

pppoed(1M)

pppstats(1M)

pprosetup(1M)

pprosvc(1M)

praudit(1M)

prctmp(1M)

prdaily(1M)

printmgr(1M)

print-service(1M)

privatepw(1M)

prodreg(1M)

projadd(1M)

projdel(1M)

projmod(1M)

prstat(1M)

prtacct(1M)

prtconf(1M)

prtdiag(1M)

prtdscp(1M)

prtfru(1M)

prtpicl(1M)

prtvtoc(1M)

psradm(1M)

psrinfo(1M)

psrset(1M)

putdev(1M)

putdgrp(1M)

pwck(1M)

pwconv(1M)

quot(1M)

quota(1M)

quotacheck(1M)

quotaoff(1M)

quotaon(1M)

raidctl(1M)

ramdiskadm(1M)

rarpd(1M)

rcapadm(1M)

rcapd(1M)

rctladm(1M)

rdate(1M)

rdisc(1M)

reboot(1M)

reject(1M)

rem_drv(1M)

remove_allocatable(1M)

removef(1M)

reparsed(1M)

repquota(1M)

re-preinstall(1M)

restricted_shell(1M)

rexd(1M)

rexecd(1M)

rlogind(1M)

rm_install_client(1M)

rmmount(1M)

rmt(1M)

rmvolmgr(1M)

rndc(1M)

rndc-confgen(1M)

roleadd(1M)

roledel(1M)

rolemod(1M)

root_archive(1M)

route(1M)

routeadm(1M)

routed(1M)

rpcbind(1M)

rpc.bootparamd(1M)

rpcinfo(1M)

rpc.mdcommd(1M)

rpc.metad(1M)

rpc.metamedd(1M)

rpc.metamhd(1M)

rpc.rexd(1M)

rpc.rstatd(1M)

rpc.rusersd(1M)

rpc.rwalld(1M)

rpc.smserverd(1M)

rpc.sprayd(1M)

rpc.yppasswdd(1M)

rpc.ypupdated(1M)

rquotad(1M)

rsh(1M)

rshd(1M)

rstatd(1M)

rtc(1M)

rtquery(1M)

runacct(1M)

rusersd(1M)

rwall(1M)

rwalld(1M)

rwhod(1M)

sa1(1M)

sa2(1M)

sac(1M)

sacadm(1M)

sadc(1M)

saf(1M)

sar(1M)

sasinfo(1M)

savecore(1M)

sbdadm(1M)

scadm(1M)

sckmd(1M)

scmadm(1M)

sconadm(1M)

sdpadm(1M)

sendmail(1M)

setuname(1M)

setup_install_server(1M)

sf880drd(1M)

sftp-server(1M)

share(1M)

shareall(1M)

sharectl(1M)

sharemgr(1M)

share_nfs(1M)

showmount(1M)

showrev(1M)

shutacct(1M)

shutdown(1M)

slpd(1M)

smattrpop(1M)

smbadm(1M)

smbd(1M)

smbiod(1M)

smbiod-svc(1M)

smbios(1M)

smbstat(1M)

smc(1M)

smccompile(1M)

smcconf(1M)

smcregister(1M)

smcron(1M)

smcwebserver(1M)

smdiskless(1M)

smexec(1M)

smgroup(1M)

smlog(1M)

smmaillist(1M)

smmultiuser(1M)

smosservice(1M)

smpatch(1M)

smprofile(1M)

smreg(1M)

smrole(1M)

smrsh(1M)

smserialport(1M)

smtnrhdb(1M)

smtnrhtp(1M)

smtnzonecfg(1M)

smtp-notify(1M)

smuser(1M)

sndradm(1M)

sndrd(1M)

sndrsyncd(1M)

snmpdx(1M)

snmp-notify(1M)

snmpXwbemd(1M)

snoop(1M)

soconfig(1M)

soladdapp(1M)

soldelapp(1M)

solstice(1M)

sppptun(1M)

spray(1M)

sprayd(1M)

srptadm(1M)

sshd(1M)

ssh-keysign(1M)

startup(1M)

statd(1M)

stclient(1M)

stmfadm(1M)

stmsboot(1M)

strace(1M)

strclean(1M)

strerr(1M)

sttydefs(1M)

su(1M)

sulogin(1M)

suninstall(1M)

SUNWafb_config(1M)

SUNWffb_config(1M)

SUNWgfb_config(1M)

SUNWifb_config(1M)

SUNWjfb_config(1M)

SUNWkfb_config(1M)

SUNWm64_config(1M)

SUNWnfb_config(1M)

SUNWpfb_config(1M)

SUNWzulu_config(1M)

svadm(1M)

svcadm(1M)

svccfg(1M)

svc.configd(1M)

svc.ipfd(1M)

svc.startd(1M)

swap(1M)

sync(1M)

syncinit(1M)

syncloop(1M)

syncstat(1M)

sysdef(1M)

syseventadm(1M)

syseventconfd(1M)

syseventd(1M)

sysidconfig(1M)

sysidkbd(1M)

sysidnet(1M)

sysidnfs4(1M)

sysidns(1M)

sysidpm(1M)

sysidroot(1M)

sysidsys(1M)

sysidtool(1M)

syslogd(1M)

sys-unconfig(1M)

talkd(1M)

tapes(1M)

tcxconfig(1M)

telinit(1M)

telnetd(1M)

tftpd(1M)

th_define(1M)

th_manage(1M)

tic(1M)

tnchkdb(1M)

tnctl(1M)

tnd(1M)

tninfo(1M)

tpmadm(1M)

traceroute(1M)

trapstat(1M)

TSIgfxp_config(1M)

ttyadm(1M)

ttymon(1M)

tunefs(1M)

turnacct(1M)

System Administration Commands - Part 3

ports

- creates /dev entries and inittab entries for serial lines

Synopsis

/usr/sbin/ports [-r rootdir]

Description

devfsadm(1M) is now the preferred command for /dev and /devices and should be used instead of ports.

The ports command creates symbolic links in the /dev/term and /dev/cua directories to the serial-port character device files in /devices and adds new entries in /etc/inittab for non-system ports found. System-board ports are given single lower-case letters for names (such as a and b) while other ports are named numerically.

ports searches the kernel device tree to find the serial devices attached to the system. It also checks /dev/term and /dev/cua to see what symbolic links to serial devices already exist. ports then performs the following:

  1. Assigns new numbers (or letters for system-board ports) to ports that are attached to the system but do not have /dev/term and /dev/cua entries. The numbers or letters assigned are the lowest-unused numbers or letters.

  2. Removes dangling links: links from /dev/term and /dev/cua pointing to no-longer-existing ports.

  3. Creates new /dev/term and /dev/cua links for new serial devices.

  4. Invokes sacadm(1M) to make new port monitor entries for the new devices. This is not done automatically for on-board ports; on workstations these ports are often not used for dial-in sessions, so a port-monitor for one of these ports must be created explicitly.

If the configuration has not changed, ports exits without doing anything.

Notice to Driver Writers

ports considers devices with a node type of DDI_NT_SERIAL, DDI_NT_SERIAL_MB, DDI_NT_SERIAL_DO, or DDI_NT_SERIAL_MB_DO to be serial port devices. Devices with one of these node types must create minor device names that obey the following conventions when calling ddi_create_minor_node(9F).

To prevent disks from attempting to automatically generate links for a device, drivers must specify a private node type and refrain from using one of the above node types when calling ddi_create_minor_node(9F).

Options

The following options are supported:

-r rootdir

Causes ports to presume that the /dev/term, /dev/cua, and /devices directories are found under rootdir, not directly under /. If this argument is specified, sacadm(1M) is not invoked, since it would update terminal administration files under /etc without regard to the rootdir.

Examples

Example 1 Creating the Serial and Dialout Minor Device Nodes

The following example creates the serial and dialout minor device nodes from the xkserial driver's attach(9E) function:

/*
* Create the minor number by combining the instance number
* with the port number.
*/ #define XKNUMPORTS           8 
#define XKMINORNUM(i, p)     ((i) << 4 | (p)) 
#define XKMINORNUM_DO(i, p)  ((i) << 4 | (p) | 0x80)
int
xkserialattach(dev_info_t *dip, ddi_attach_cmd_t cmd)
{
   int instance, portnum;
   char name[8];
       /* other stuff in attach... */
   instance = ddi_get_instance(dip);
   for (portnum = 0; portnum < XKNUMPORTS; portnum++) {
       /*
        * create the serial port device
        */
        sprintf(name, "%d", portnum);
        ddi_create_minor_node(dip, name, S_IFCHR,
           XKMINORNUM(instance, portnum), DDI_NT_SERIAL, 0);

        /*
         * create the dialout device
         */
         sprintf(name,"%d,cu", portnum);
         ddi_create_minor_node(dip, name, S_IFCHR,
             XKMINORNUM_DO(instance, portnum), DDI_NT_SERIAL_DO, 0);
     }
}

Example 2 Installing the xkserial Port Driver on a Sun Fire 4800

The following example installs the xkserial port driver on a Sun Fire 4800 (with the driver controlling the fictional XKSerial 8 port serial board), with these special files in /devices:

# ls -l /devices/ssm@0,0/pci@18,700000/pci@1/xkserial@f,800000/
crw-r-----   1 root sys   32,  16 Aug 29 00:02 xkserial@2000:0
crw-r-----   1 root sys   32, 144 Aug 29 00:02 xkserial@2000:0,cu
crw-r-----   1 root sys   32,  17 Aug 29 00:02 xkserial@2000:1
crw-r-----   1 root sys   32, 145 Aug 29 00:02 xkserial@2000:1,cu
crw-r-----   1 root sys   32,  18 Aug 29 00:02 xkserial@2000:2
crw-r-----   1 root sys   32, 146 Aug 29 00:02 xkserial@2000:2,cu
crw-r-----   1 root sys   32,  19 Aug 29 00:02 xkserial@2000:3
crw-r-----   1 root sys   32, 147 Aug 29 00:02 xkserial@2000:3,cu
crw-r-----   1 root sys   32,  20 Aug 29 00:02 xkserial@2000:4
crw-r-----   1 root sys   32, 148 Aug 29 00:02 xkserial@2000:4,cu
crw-r-----   1 root sys   32,  21 Aug 29 00:02 xkserial@2000:5
crw-r-----   1 root sys   32, 149 Aug 29 00:02 xkserial@2000:5,cu
crw-r-----   1 root sys   32,  22 Aug 29 00:02 xkserial@2000:6
crw-r-----   1 root sys   32, 150 Aug 29 00:02 xkserial@2000:6,cu
crw-r-----   1 root sys   32,  23 Aug 29 00:02 xkserial@2000:7
crw-r-----   1 root sys   32, 151 Aug 29 00:02 xkserial@2000:7,cu

/dev/term contain symbolic links to the serial port device nodes in /devices

# ls -l /dev/term
/dev/term/0 -> ../../devices/[....]/xkserial@2000:0
/dev/term/1 -> ../../devices/[....]/xkserial@2000:1
/dev/term/2 -> ../../devices/[....]/xkserial@2000:2
/dev/term/3 -> ../../devices/[....]/xkserial@2000:3
/dev/term/4 -> ../../devices/[....]/xkserial@2000:4
/dev/term/5 -> ../../devices/[....]/xkserial@2000:5
/dev/term/6 -> ../../devices/[....]/xkserial@2000:6
/dev/term/7 -> ../../devices/[....]/xkserial@2000:7

and /dev/cua contain symbolic links to the dialout port device nodes in /devices

# ls -l /dev/cua

/dev/cua/0 -> ../../devices/[....]/xkserial@2000:0,cu
/dev/cua/1 -> ../../devices/[....]/xkserial@2000:1,cu
/dev/cua/2 -> ../../devices/[....]/xkserial@2000:2,cu
/dev/cua/3 -> ../../devices/[....]/xkserial@2000:3,cu
/dev/cua/4 -> ../../devices/[....]/xkserial@2000:4,cu
/dev/cua/5 -> ../../devices/[....]/xkserial@2000:5,cu
/dev/cua/6 -> ../../devices/[....]/xkserial@2000:6,cu
/dev/cua/7 -> ../../devices/[....]/xkserial@2000:7,cu

Files

/dev/term/n

Logical serial port devices

/dev/cua/n

Logical dialout port devices

/etc/inittab

/etc/saf/*

Attributes

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE
ATTRIBUTE VALUE
Availability
SUNWcsu

See Also

add_drv(1M), devfsadm(1M), drvconfig(1M), pmadm(1M), sacadm(1M), attributes(5), devfs(7FS), attach(9E), ddi_create_minor_node(9F)

Writing Device Drivers