Go to main content

Oracle^® ILOM Protocol Management Reference for SNMP and IPMI Firmware Release 3.2.x

Exit Print View

» ...Documentation Home » Oracle Integrated Lights Out Manager (ILOM) ... » Oracle^® ILOM Protocol ... » Manage SPARC Diagnostics, POST, and Boot Mode ... » Managing SPARC Diagnostic, POST, and Boot Mode ... » Manage SPARC Host Keyswitch Property

Updated: January 2017

Oracle^® ILOM Protocol Management Reference for SNMP and IPMI Firmware Release 3.2.x

Document Information

Using This Documentation

Configuring SNMP Settings in Oracle ILOM

Manage User Accounts Using SNMP

Manage Component Information and Email Alerts (SNMP)

Monitor and Manage System Power (SNMP)

Manage Oracle ILOM Firmware Updates (SNMP)

Manage Oracle ILOM Backup and Restore Configurations (SNMP)

Manage SPARC Diagnostics, POST, and Boot Mode Operations (SNMP)

Before You Begin Manage SPARC Hosts (SNMP)

Managing SPARC Diagnostic, POST, and Boot Mode Properties (SNMP)

Manage SPARC Host Diagnostic Properties

Manage SPARC Host POST Operations

Manage SPARC Host Boot Mode Properties

Manage SPARC Host Keyswitch Property

Server Management Using IPMI

SNMP Command Examples

Language:

Manage SPARC Host Keyswitch Property

Note - You can use the get and set commands to view and configure SPARC key switch settings. For a description of the MIB objects used in these commands, see the SUN-ILOM-CONTROL-MIB.

Log in to a host that has an SNMP tool and the Oracle ILOM MIBs installed. For example, type:
ssh username@snmp_manager_ipaddress

Password: password

Refer to the following SNMP command examples:
- To view the current state of the virtual key switch, type:
```
% snmpget SNMP_agent ilomCtrlSPARCKeySwitchState.0
```
- To set the state of the virtual key switch to standby, type:
```
% snmpset SNMP_agent ilomCtrlSPARCKeySwitchState.0 i 2
```

Copyright © 2014, 2017, Oracle and/or its affiliates. All rights reserved.