Oracle^® ILOM Protocol Management Reference for SNMP and IPMI Firmware Release 3.2.x

Before You Begin User Accounts (SNMP)

Prior to performing the procedures in this section, you must ensure that the following requirements are met:

• To use SNMP, ensure that all the SNMP properties are correctly set. For more details, see Configuring SNMP Settings in Oracle ILOM.

  To view user account information, you need the Read Only (o) role enabled.

• To configure user account information, you need the User Management (u) role enabled.

• To execute the snmpset command, you need to use an SNMP v1 or v2c community or an SNMP v3 user account with read-write (rw) privileges.

  ---

  Note -  For examples of SNMP commands, see SNMP Command Examples.

  ---

  ---

  Note -  The SNMP commands presented in this section are based on the Net-SNMP sample applications and, therefore, will work as presented only if you have Net-SNMP and the Net-SNMP sample applications installed.

  ---