Go to main content

Oracle® ILOM Protocol Management Reference for SNMP and IPMI Firmware Release 3.2.x

Exit Print View

Updated: January 2017
 
 

Before You Begin Power Management (SNMP)

Prior to performing the procedures in this section, ensure that the following requirements are met.

  • Before you can use SNMP to view and configure Oracle ILOM settings, you must configure SNMP. For more information, see Configuring SNMP Settings in Oracle ILOM.

  • To execute the snmpset command, you need to use an SNMP v1 or v2c community or an SNMP v3 user account with read-write (rw) privileges.


    Note -  For examples of SNMP commands, see SNMP Command Examples.

    Note -  The SNMP commands presented in this section are based on the Net-SNMP sample applications and, therefore, will work as presented only if you have Net-SNMP and the Net-SNMP sample applications installed.