Oracle^® ILOM Protocol Management Reference for SNMP and IPMI Firmware Release 3.2.x

Before You Begin SNMP User Accounts

Before performing the procedures in this section, ensure that the following requirements are met:

• To set SNMP user account properties in Oracle ILOM, you need the User Management (u) role enabled.

• Verify that the proper SNMP settings are enabled in Oracle ILOM. See Set SNMP Access and Authorization.

  ---

  Note -  When you are working in the Oracle ILOM CLI, if the sets parameter is disabled, all SNMP MIB objects are read-only.

  ---

• To execute the snmpset command, you need to use an SNMP v1 or v2c community or an SNMP v3 user account with read-write (rw) privileges.

  ---

  Note -  The SNMP commands presented in this section are based on the Net-SNMP sample applications and, therefore, will work as presented only if you have Net-SNMP and the Net-SNMP sample applications installed.

  ---