Oracle^® ILOM Protocol Management Reference for SNMP and IPMI Firmware Release 3.2.x

Before You Begin Manage SPARC Hosts (SNMP)

Prior to performing the SNMP procedures for managing SPARC diagnostics, POST, and boot mode properties, ensure that the following requirements are met.

• Before you can use SNMP to view and configure Oracle ILOM settings, you must configure SNMP. For more information, see Configuring SNMP Settings in Oracle ILOM.

• To execute the snmpset command, you need to use an SNMP v1 or v2c community or an SNMP v3 user account with read-write (rw) privileges.

• For examples of SNMP commands, see SNMP Command Examples.

  ---

  Note -  The SNMP commands presented in this section are based on the Net-SNMP sample applications and, therefore, will work as presented only if you have Net-SNMP and the Net-SNMP sample applications installed.

  ---