Go to main content

man pages section 7: Device and Network Interfaces

Exit Print View

Updated: July 2017
 
 

qlc(7D)

Name

qlc - ISP2432, ISP2500, ISP2600, ISP2700, ISP8100, ISP8200, and ISP8300 Family Fibre Channel / CNA host bus adapter driver

Synopsis

SUNW,qlc

Description

The qlc host bus adapter driver is a Sun Fibre Channel transport layer-compliant nexus driver for the Qlogic ISP2432, ISP2500, ISP2600, ISP2700, ISP8100, ISP8200, and ISP8300 adapters. The adapters support Fibre Channel SCSI protocol, point-to-point fabric connection and Fibre Channel service classes two and three (see NOTES section below). The ISP2600 (Fibre Channel 16Gb) and the ISP2700 (Fibre Channel 32GB) support the Oracle Solaris FC SR-IOV features on SPARC platforms. For more information, refer to the Oracle VM Server for SPARC documentation.

The qlc driver interfaces with the Sun Fibre Channel transport layer to support the standard functions provided by the SCSA interface. It supports auto request sense and tagged queueing by default. The driver requires that all devices have unique hard addresses in private loop configurations. Devices with conflicting hard addresses are not accessible.

Files

/kernel/drv/amd64/qlc

64-bit ELF kernel module (x86)

/kernel/drv/sparcv9/qlc

64-bit ELF kernel module (SPARC)

/kernel/drv/qlc.conf

Driver configuration file

Attributes

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE
ATTRIBUTE VALUE
Architecture
SPARC, x86
Availability
driver/fc/qlc

See Also

prtconf(1M), driver.conf(4), fcp(7D), fp(7d)

Writing Device Drivers

ANSI X3.230:1994, Fibre Channel Physical Signaling (FC-PH)

Project 1134-D, Fibre Channel Generic Services (FC-GS-2)

ANSI X3.269-1996, Fibre Channel Arbitrated Loop (FC-AL)

ANSI X3.270-1996, Fibre Channel Protocol for SCSI (FCP-SCSI)

ANSI X3.270-1996, SCSI-3 Architecture Model (SAM)

Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA)

Fabric Loop Attachment (FC-FLA)

ISP2400 Firmware Interface Specification, QLogic Corporation

ISP2500 Firmware Interface Specification, QLogic Corporation

ISP2600 Series Firmware Specification, QLogic Corporation

Notes

The ISP2500, ISP2600, ISP2700, ISP8100, ISP8200, and ISP8300-based host bus adapters do not support FC-IP topology. FL-AL topology is not supported with the ISP2600, ISP2700, ISP8100, ISP8200, and ISP8300-based host bus adapter. Only the ISP2432 supports FC-IP protocol.