bfe - Device driver for Broadcom BCM4401 100Base-T NIC
The bfe Fast Ethernet driver is GLD-based and supports the Broadcom BCM4401 100Base-T NIC adapters :pci14e4,170c Broadcom BCM4401 100Base-T..
The bfe driver supports IEEE 802.3 auto-negotiation, flow control and VLAN tagging.
The default configuration is auto-negotiation with bidirectional flow control. The advertised capabilities for auto-negotiation are based on the capabilities of the PHY.
You can set the capabilities advertised by the bfe controlled device using dladm(1M). The driver supports only those parameters which begin with en (enabled) in the parameters listed by the command dladm(1M). Each of these boolean parameters determines if the device advertises that mode of operation when the hardware supports it.
Special character device
64-bit device driver (x86)
See attributes(5) for a description of the following attributes:
STREAMS Programmer's Guide
Oracle Solaris 11.2 Programming Interfaces Guide
IEEE 802.3ae Specification - 2002