Go to main content

Oracle® Rack Cabinet 1242 User's Guide

Exit Print View

Updated: June 2021
 
 

Attach a Grounding Cable for TT Power Systems


Caution

Caution  -  When installing the rack in Japan, or other locations that use a TT power systems, you must attach a separate grounding cable to the rack.


  1. Obtain a grounding cable that is at least 6 AWG in size.
  2. Use a T-30 Torx screwdriver to attach the grounding cable to the rack grounding terminal.

    The grounding terminal is located under the cabinet between the two rear casters on the inside of the caster plate.


    image:Picture shows the grounding cable being attached to the
                                cabinet.
  3. Attach the other end of the grounding cable to a reliable earth ground in the building using established electrical guidelines and in accordance with electrical codes for the country of installation.

    Caution

    Caution  -  If the installed equipment makes additional connections to earth ground, ensure that all grounding points reference the same earth ground to prevent dangerous ground loops.