Stabilize the Rack (Leveling Feet)
After you move the rack to the installation site, stabilize the rack using the leveling feet to ensure it does not move or tip over when you install equipment.
Lower the four leveling feet to share the load with the casters. This increases the footprint of the rack which improves stability and helps prevent rack movement.
-
Stabilize the rack by lowering the four leveling feet to the floor, using a
6-mm hex wrench or your fingers.
-
Lock the leveling feet using an 18-mm open wrench.
Caution - When moving the rack to a new location, including repacking, verify that the leveling feet are up before moving the rack.