Use the following tools and equipment to install and service the rack:
Unpacking Tools (provided in rack ship kit)
17 mm and 13 mm open-ended, double-sided wrench
Allen L-Key hex 6mm wrench, 5-3/4 inches in length
Allen L-Key hex 8mm wrench, 6-3/8 inches in length
Rack Setup Tools and Accessories (provided in rack ship kit)
32 M6 cage nuts and washers
32 M6 pan head screws
8 M5 screws
8 self-tapping Torx screws
4 PDU brackets
4 M5 cage nuts
4 grounded power cables
18 mm and 16 mm open-ended, double-sided wrench
T-40 Torx screwdriver
T-25 Torx screwdriver
T-15 Torx screwdriver
8 mm and 6 mm Allan wrench
Cage nut tool
Keys to the front door, rear door, and side panel locks
17 mm and 13 mm mopen-ended, double-sided wrench
Customer-Supplied Tools (not provided in rack ship kit)
No. 2 Phillips screwdriver
Diagonal cutter
Antistatic wrist strap