Oracle^® Server X8-2 Service Manual

Power On the Server

As soon as the power cords are connected, Standby power is applied. In Standby power mode:

• The System OK LED on the server front panel blinks slowly.

• The SP OK LED indicator is steady on.

• The AC power supply LED indicator lights are steady on.

  Depending on the firmware configuration, the system might boot. If it does not boot, perform the following procedure.

• Power on the server to Main power mode by performing one of the following actions:
  • Press the On/Standby button on the front bezel.
  • Log in to the Oracle ILOM web interface, click Host Management → Power Control and select Power On from the Select Action list.
  • Log in to the Oracle ILOM command-line interface (CLI), and type the following command at the Oracle ILOM prompt:

    -> start /System
    

    When the server is powered on to Main power mode and the power-on self-test (POST) code checkpoint tests have completed, the green System OK LED status indicator on the front panel of the server lights and remains lit.

Related Information

• Powering Down the Server

• Reconnect Data Cables and Power Cords